Breg Vectra Lite Walker Boot Liner Kit

Why Breg Vectra Lite Walking Brace Liner Kit is Used?

Breg Vectra Lite Walking boot Liner Kit is ideal and useful in following conditions:

• Soft tissue injuries of the lower leg
• Moderate to severe ankle sprains
• Syndesmosis (high ankle) sprain
• Forefoot or midfoot or hindfoot pain and injuries
• Stable foot or ankle fractures
• Post-ORIF and surgical stabilization after tendon or ligament repairs
• Metatarsal fracture
• Other acute or post-operative use i.e. bunionectomy

What to Buy with Breg Walker Boot Liner Kit?

• Span America Limb Elevator
• Bell-Horn Fast Freeze Pro Style Continuous Therapy Spray
• Cardinal Health Reusable Hot And Cold Gel Packs

How to Apply Breg Walker Boot Liner Kit?

1. Apply liner to leg
2. With patient seated, leg bent and feet off the floor, position tongue pad as needed for maximum comfort, close liner snugly
3. Slide walker onto leg over the liner straight up directly underfoot
4. Fasten straps
5. Start with straps 1 and 2 closest to the toes (Straps may be trimmed to the desired length)
6. Position walker with uprights centered over the malleoli (ankle bones)
7. Ensure heel is positioned at the rear of the Walker
8. Remove quick-pulls from the uprights and discard
9. Attach uprights to the liner
10. Press firmly
11. Fasten straps
12. Affix straps 3 through 5 to the outside of the uprights by alternating the buckle placement
13. Then fasten straps 3 through 5
14. After the initial application, the Vectra may be removed and reapplied without removing the liner from boot.

Breg Walker Boot Liner Kit Instruction Manual

Clean and Care Instructions For Breg Ankel Walker Brace Liner Kit:

• Hand wash the liner and straps
• Use mild soap
• Air dry the liners
• Do not place liner or straps into a mechanical dryer