Talkable II Communicator With Built-In Icon Holder
Talkable II Communicator With Built-In Icon Holder

Talkable II Communicator With Built-In Icon Holder

Brand/Manufacturer: ENABLING DEVICES
Save

Talkable II Communicator With Built-In Icon Holder is compact visual message communicator which allows for simple communication. This communicator features two messages recording, two output jacks, easy single message recording and requires four AAA batteries.

Item #DescPkgPrice 
2400 7.5"L x 4.5"W x 3"H Each $239.99 $169.95

Features

  • Note: Batteries are not included

More Information

  • Operation:
    -
    Carefully turn unit over and remove the small screw from the battery compartment. Remove the screw and slide the cover to one side. Next install 4 AAA batteries. Alkaline batteries must be used only (e.g. Duracell or Energizer brand). Do not use rechargeable batteries or any other type of batteries because they supply lower voltage and the unit will not perform properly.
    - Never mix brands, types or old and new batteries together. Replace the battery compartment cover and replace the screw.
    - Turn the unit on by turning the ON/OFF/VOLUME knob located on the bottom panel of the unit. To record, first press and hold the red “RECORD" button press down one of the colored plates. While continuing to hold the plate down, speak your message. Release both when you finish recording. Record on the other plate in the same manner.
    - To play back your message, press lightly on the plate of your choice. It is not necessary to continue holding the plate down when listening to the message. The unit will continue to playback the entire message, even if pressure on the plate is released.
    - The unit will retain recorded information indefinitely, even if the batteries are disconnected. Previously stored information will be erased only when a new recording is performed.
    - Playback volume can be adjusted using the “ON/OFF/VOLUME" control knob located on the bottom panel of the unit.
    - This unit can also be used to activate switch adapted toys or devices. Simply attach the toy or device to the corresponding 1/8 inch female jack using the cords provided. There is an output jack for each or the switch plates. When the plate is pressed, the message will play and the toy or device will be activated. Make sure all connections are tight with no gaps between cords.
  • Important Notes:
    - The memory of this unit is capable of holding up to a total of 5seconds of speech information.
  • Care:
    -
    The Talkable ll can be wiped clean with any mild household multi-purpose, nonabrasive cleaner and disinfectant. We recommend Simple Green, which is a non toxic biodegradable all-purpose cleaner.
    - Do not use abrasive cleaners, as they will scratch the surface of the unit.
    - Do not submerge the unit, as it will damage the electrical components.

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close