Smart FallGuard TL-2100G CordLess Monitor With Sensor Pad and Transmitter
Smart FallGuard TL-2100G CordLess Monitor With Sensor Pad and Transmitter

Smart FallGuard TL-2100G CordLess Monitor With Sensor Pad and Transmitter

Brand/Manufacturer: SMART CAREGIVER CORPORATION
Save
Authorized Retailer Badge

Smart FallGuard TL-2100G CordLess Monitor With Sensor Pad and Transmitter functions with absolutely no cords between the pad and the monitor. It improves safety by avoiding tripping over and trapping of cord, and the alarming monitor can be placed outside the room (up to forty feet away) from a resident so that when it alarms, the resident is not disturbed by the noise.

Item #DescPkgRewardPrice 
GC90-SYS 10" x 15", With CordLess Chair Sensor Pad, 90 Day Each $1.35
$197.75
$134.99
GB90-SYS 10" x 30", With CordLess Bed Sensor Pad, 90 Day Each $1.48
$205.55
$147.75
GBR1-SYS 10" x 30", With CordLess Bed Sensor Pad, 1 Year Each $1.50
$209.99
$149.99
GC1-SYS 10" x 15", With CordLess Chair Sensor Pad, 1 Year Each $1.50
$209.99
$149.99
GBW1-SYS 20" x 30", With CordLess Bed Sensor Pad, 1 Year Each $1.51
$210.45
$151.45
GFM7-SYS 24" x 48", With Long Floor Mat, Gray, 1 Year Each $1.98
$275.55
$197.75

Features



  • Smart FallGuard TL-2100G CordLess Monitor With Sensor Pad and Transmitter works with 2 sensor pads simultaneously
  • Pads are connected to a wireless transmitter which is placed inside the pressure pad
  • Cordless pad technology communicates with the monitor using wireless technology
  • When weight is removed from the pad, the bed alarm will sound, alerting the caregiver that the resident is attempting to get out of their bed or chair
  • Tamperproof technology allows only the caregiver to silence an alarming monitor (when in caregiver key on mode)
  • Includes a reset or status light button which both silences the monitor and flashes every 4 seconds indicating proper functioning of pad and monitor
  • Easy maintenance for reliable performance
  • Adjustable tone and volume
  • Low battery notification
  • No on and off switch
  • Also availale (sold separately)
    - Smart Bed Monitor Sensor Pads (Code: PPB-90)
    - Smart Chair Monitor Sensor Pads (Code: PPC-90)

More Information

  • CordLess Bed Sensor Pads:
    Test the system
    - Apply pressure to the pad to activate system. The Monitor will beep twice when activated. The Status/In Use light on the front of monitor will blink as on as there is pressure on the pad.
    - The alert will sound whenever pressure is released from pad. Press the Reset button on front of monitor or use the Caregiver Key, depending on your reset setting to silence the alert.
    - If the Check Pad light is on and system does not test properly, reduce the distance between the monitor and the pad. Retest.
    BED PAD PLACEMENT
    - Place the pad under shoulders to be alerted when the resident sits up in bed.
    - Place pad under the hips/buttocks to be alerted when the resident vacates the bed.
    - Place the monitor up to100 feet away from the resident.
  • CordLess Chair Sensor Pads.
    Test the system
    - Apply pressure to the pad to activate the system. The monitor will beep twice when activated. The Status/In Use light on the front of the monitor will blink as long as there is pressure on the pad.
    - The alert will sound when pressure is released from pad. Press the Reset button on front of the monitor or use the Caregiver Key, depending on your reset setting to silence the alert.
    - If the Check Pad light is on and system does not test properly, reduce distance between the monitor and the pad. Retest.
    WHEELCHAIR/CHAIR PAD PLACEMENT.
    - Center pad on the chair seat under buttocks.
    - Place the monitor up to100 feet away from the resident.
  • CordLess Floor Mats:
    Test the system
    - Step on the Floor Mat to set off the alert. The monitor is now active. The alert will sound anytime weight is on the floor mat.
    - When the alert is activated, press the button on the front of the monitor or use the Caregiver Key, depending on your reset setting to silence the alert.
    Note: The Status Light does not function when using floor mats.
    -If the Check Pad light is on and the system does not test properly, reduce the distance between the monitor and the floor mat. Retest.
    Floor Mat Placement:
    - Place the floor mat in the desired location such as a critical doorway or next to the bed.
    - Place the monitor up to100 feet away from the floor mat.
  • Seat Belts:
    Seat Belt Placement:
    - Unscrew one screw on either side of wheelchair that holds seat in place.
    - Attach seat belt to wheelchair by lining up the grommet holes on seat belt with the screw holes. Re-insert screws through both seat belt and wheelchair to hold seat belt in place. Make sure the screws are tightened.
    - Adjust the seat belt to the desired length using the black buckle that holds the adjustment strap in place.
    - Connect the seat belt cord to the monitor.
    - Place the monitor out of reach of the resident. Suitable mounting location is the back of wheelchair, so that the resident cannot tamper with the monitor.
    Test the System:
    - Buckle and unbuckle the seat belt to set off the alert. The monitor is now active. The alert will sound whenever the seat belt is unbuckled.
    - When the alert is activated, press the Reset button on front of the monitor to silence the alert or use the Caregiver Key, depending on your reset setting. The status light on front of monitor will blink when the seat belt is plugged into the monitor and buckled.

Warranty

1 year warranty

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close