ROHO Agility Max Contour Back System
ROHO Agility Max Contour Back System

ROHO Agility Max Contour Back System

Brand/Manufacturer: THE ROHO GROUP
Authorized Retailer Badge

ROHO Agility Max Contour Back System featuring ROHO air floatation technology that gives wheelchair users comfortable support without sacrificing function. It is recommended for people using wheelchairs who need basic postural support and minimal trunk support. Agility back shell can be flipped to accommodate wider torsos and broader shoulders.

ROHO Agility Max Contour Back System Highlights:

  • Stronger
  • Comfortable
  • Ease of Adjusting
  • Angle Adjustable
  • Flippable

Buy this product and earn 32 Reward Dollars.

  • Model
  • Size
  • Back Mounting Hardware
  • Lateral Pads Fixed with Flat Pad (Pair)
  • Lateral Pads Swing-Away with Curved Pad (Pair)
  • Total: $979.99
    Total: $639.99
Total: $979.99
Total: $639.99

ROHO Agility Max Contour Back System Includes

  • Back shell
  • Back shell hardware
  • Back cane hardware
  • Cover
  • Foam pad
  • Air insert
  • Lateral air inserts
  • Foam insert
  • Dual wrench
  • Lumbar support pad (select models)
  • Repair kit
  • Hand pump
  • Quick set-up guide
  • Operation manual

ROHO Agility Mid Contour Back System Features

  • Easy to install and remove for storing wheelchair
  • Flippable shell accommodates more body contours and shapes
  • Lightweight aluminum backrest
  • Aesthetically attractive design
  • Adjustable air cells for added comfort that can be adjusted to accommodate postural shifts.
  • Lumbar support pad provides additional support
  • Air insert on the wings of the back to promote increased comfort
  • Rigid design helps maximize effectiveness of every push of the wheelchair and doesn;t limit range of motion
  • Passed 100,000 cycles without damage or slippage when 300 lb. of force was exerted directly to the most vulnerable part of the back

Why Agility Max Contour Back System?

  • Roho Air Flotation Insert
    • Supports postural changes
    • Allows individuals to adjust air volume to their desired comfort level

  • Safety You Can Depend On
    • Springless, gravity-based lock system safely secures Agility to the chair and comes with a safety latch for added security
    • Hardware tested and passed 100,000 cycles at 300 lbs (136.0 kg) of force to top edge of Agility Back
    • Tested above and beyond industry test standards and passed
    • Suitable for wheelchair users in a motor vehicle
    • Tested and surpassed industry motor vehicle crash test standards:- ANSI/RESNA WC-20 Seating Devices for use in motor vehicles

  • Quick Release Hardware for Easy, Single Hand Removal
    • Easily remove AGILITY for transport or storage even with limited hand dexterity. Simply unlock and lift with handle.
    • Reinstall easily, quickly and lock in place by sliding safety latch into the locked position.
    • One-piece cane clamp fits 3/4" to 1" (2 to 3 cm) diameter canes on most wheelchairs and swings around the cane for quick installation.
    • Exclusive one-piece clamp design fastens quickly to the canes. No loose parts. Clamp it, tighten it, done.
    • One-bolt clamp adjustment also allows for fast vertical adjustment.
    • Ability to adjust angle and depth while the individual remains in the wheelchair
    • Single-point angle adjustment with the full range of tilt adjustments from 5. degrees to 15 degrees forward or backward to meet the clinical/functional needs of the individual.
    • Cane width, angle and seat depth adjustment tick marks on the hardware allow for precise, fully aligned adjustments.
    • Takes the guesswork out of adjusting a back system

  • Specification




    Range is 6.5" to 7.25" (17cm to 18cm)

    Measurements are taken from the highest point of a contoured edge of the cover to the center, front surface of a cover assembled with an air insert inflated to allow 0.5" (2.5cm) immersion

    Weight:Range is 4.25lb to 6.5lb (2.0kg to 3.0kg)

    Based on Agility Max Contour sizes: 14" x 16" (35.5cm x 40.5cm) and 20" x 20" (51.0cm x 51.0cm)

    Wing Air Inserts:Width (W): 4.25" (10.5cm)
    Length (L): 7" (17.5cm)
    Cell Height (H): 1.75" (4.5cm) when fully inflated
    Perimeter: 0.25" (1.0cm) included in width and length measurements


    36 month limited warranty on back shell and hardware, 18 month limited warranty on cover, foam and air insert

    Customer Reviews

    Questions & Answers


    Enter your Answer below.

    Security Question: + =
    question image
    ItemName - now

    Your question will show here once it will get approved.
    answer image
    UserName - now
    Your Answer will show here once it will get approved.
    Please enter your and your friends email address below.
    Fields marked with * are compulsory

    The selected product information has been successfully emailed to your friend.

    Thank you for using