Responsive Respiratory Respond C5 Single Lumen Oxygen Conserver

Responsive Respiratory Respond C5 Single Lumen Oxygen Conserver



This product is on backorder and will be available to purchase once it is back in stock.

Responsive Respiratory Respond C5 Single Lumen Oxygen Conserver is a high-pressure oxygen regulator and conserving device that is combined into a single compact unit. It operates in the same manner as traditional oxygen pressure regulators with the added benefit of having a conserving device included. The system is designed for use by an ambulatory patient with a high-pressure oxygen cylinder. Since the Respond C5 requires no electrical (battery) power source, it is a reliable and easy to use the device.


  • Responsive Respiratory Respond C5 Single Lumen Oxygen Conserver is a combined regulator and conserving device
  • It provides therapy and conserves oxygen by delivering the patient;s prescribed liter flow only during inhalation
  • The user can switch between Continuous and Conserve
  • Mode simply by turning the knob
  • The device has a compact one-piece aluminum body with all-brass in the high-pressure zone
  • It includes a click-style flow control with 10 flow settings
  • For additional safety and longer device life, it has a sintered bronze high-pressure inlet filter
  • Whisper quiet - ideal for church, movie bingo outings
  • 2-in-1 design with built in regulator
  • 5:1 Conservation {1, 2, 2.5, 3, 4, 5}
  • Continuous Flow 2, 3, 4 LPM
  • Includes M6 Cylinder Carry Case
  • Duration Chart

More Information

  • Removal of the Respond C5 from the cylinder:
    - Close the cylinder valve
    - Set the adjusting knob to the lowest flow setting and allow the regulator to de-pressurize
    - Be sure the contents gauge reads zero
    - Remove regulator from cylinder valve
  • Cleaning and Maintenance:
    - The exterior surfaces can safely be wiped off with a clean, lint-free cloth.
    - If the cloth is dampened with water, do not let water enter the relief valve or vent holes
  • Warning:
    - If grease or oil is visible or suspected to be present, DONOT use the device, and do not attempt to clean or repair it
    - Have it serviced by qualified personnel
    - If any leakage of the oxygen cylinder is detected, turn the valve stem or handle clockwise until the cylinder valve is closed
    - If leakage persists, place the cylinder outdoors and notify the gas supplier immediately



Operating Pressure500 to 3000 PSIG
Outlet Pressure Nominal22 PSI
Selectable outlet flow1-5 LPM Conserving; 2-4 LPM continuous
Oxygen ConservationNominal 75% at all setting based upon an avg I:E ratio
Inlet ConfigurationCGA 870 Pin Indexed Yoke
Outlet connectionCannula hose barb
Unit Weight14 oz (0.9 lbs)
Storage Temperature (degrees C)-20 to 60
Operating Temperature (degrees C)0 to 40
Diameter gage1-1/4"


Three Years Warranty

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory


The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using



Also Available

${{ x.OurPrice | currency: "" : 2}}

Articles & news

Related Articles


{{x.ShortDescription}} ...

Questions & Answers

Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.