10% Off Women's Health and Rehab & Therapy, Code: ATBF10, Exclusions Apply
Day
:
:
  866-316-0162

Responsive Respiratory E Series Value Oxygen Regulator - 15 LPM CGA 540

Options

Item# Description Pkg reward$ Price Blank
Item #: 120-3060
Regulator, 0-15 Lpm With DISS Outlet, Cga 870
Each
Each
reward$
$2.69
$75.39
$53.79

Responsive Respiratory E Series Value Oxygen Regulator - 15 LPM CGA 540 is intended for the administration of oxygen to patients who need to increase oxygen levels to improve their breathing conditions. In addition, some models may be used in emergency situations. In an emergency situation, one should be sure to contact a physician or EMS immediately. 0 to 15 LPM Regulator, CGA 540 with DISS outlets. It has a lightweight aluminum body with all brass core and direct flow orifice design. Oxygen regulator is rated for use up to 3000 PSI and has an ergonomic handle. Meets FDA, CGA, ASTM Standards.

How to set up E Series Value Oxygen Regulator?

  • Inspect the cylinder following the instructions of the gas supplier. Be sure to purge the cylinder valve seat of debris
  • Inspect the regulator for oil or grease. If visible. DO NOT use the regulator
  • Gently thread the large nut on the regulator onto the connection on the cylinder valve
  • Tighten the nut with a wrench until snug
  • Attach the oxygen supply tubing to the outlet connection of the regulator

How to use Responsive Respiratory E Series Value Oxygen Regulator?

  • Be sure the regulator is in the off position by rotating the knob counterclockwise to the 0 position
  • For safety be sure you are not directly in front of or behind the regulator when opening the cylinder valve
  • Slowly turn the cylinder valve on (counterclockwise), about one full turn
  • If hissing sound comes, there is a leak in the system. Turn the cylinder off and turn the regulate on to relieve any built up pressure. Try tightening the regulator to the cylinder and opening the cylinder again. If this does not help, shut the system down again and contact a service representative
  • Adjust the flow rate setting by turning the knob clockwise until the desired setting shows through the window
  • If the cylinder pressure falls below 300 PSI, one should exchange the cylinder for a full one
  • Turn off the system, close the cylinder valve, wait for oxygen to flow out of the regulator, and turn the regulator to the 0 position
  • NEVER try to remove the regulator unless the cylinder is off and pressure has been relieved
  • Flow Ranges :.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 15 LPM
  • Responsive Respiratory E Series Value Oxygen Regulator Duration Chart

  • Warranty

    • 1 Year Manufacturers Warranty: Covers internal components only. External gauges, barbs, washers, knobs and Tee handles are not covered.

    Customer Reviews

    {{x.Heading}}

    {{x.ShortDescription}} ...

    Share

    Please enter your and your friends email address below.

    Fields marked with * are compulsory

    Your Name*
    Your Email Address
    Friend's Name*
    Friend's Email Address
    Message
    The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

    Thank you for using www.healthproductsforyou.com

    Close