Precision Medical EasyPulse Portable Oxygen Concentrator External Battery

How to use EasyPulse Portable External Battery?

• Use only Precision Medical AC Power Supply (Part #506629) or Precision Medical DC Power Supply (Part #506750) for charging
• The external battery is not intended to be charged while connected to the EasyPulse POC. Before charging, make sure to disconnect the discharge cable from the EasyPulse POC
• Connect the DC Plug from either power supply to the external battery’s charging jack as shown on the next page. If using the AC Power Supply, plug the AC wall plug into a wall socket. If using the DC Power Supply, plug the Auto Accessory Plug into your vehicle’s 12 VDC accessory jack
• One of the green LED’s on the battery level indicator will flash during charging. When all LED’s appear solid (no flashing) the battery is fully charged.
• NOTE:
  • When charging a depleted battery it may take a few minutes for green LED to begin flashing.
  • To reduce the risk of electrical shock, do not remove cover of external battery, no user serviceable parts inside. Refer servicing to qualified service personnel
• Warning:
  • Disconnect External Battery from POC when not in use
  • DO NOT drop External Battery, this could damage the internal components of the battery and will void the warranty

Using the EasyPulse External Lithium-ion Battery

1. Before using battery, be sure to disconnect any power supply from the external battery’s charging jack
2. Plug the external battery discharge cable into the power jack on the EasyPulse POC
3. Turn on the EasyPulse POC to desired setting
4. The EasyPulse POC will draw power from the external battery until the external battery is depleted. The POC will switch over to the internal battery only after the external battery is depleted or disconnected. NOTE: The battery level indicator on the EasyPulse POC control panel will turn off while the external battery is connected.
5. You can check the external battery level at any time by pushing the battery level indicator button. The battery level is indicated by the number of green LED’s that are displayed
   • (1) LED flashing: < 5% charge remaining
   • (1) LED solid: between 5% - 20% charge remaining
   • (2) LEDs solid: between 20% - 40% charge remaining
   • (3) LEDs solid: between 40% - 60% charge remaining
   • (4) LEDs solid: between 60% - 80% charge remaining
   • (5) LEDs solid: between 80% - 100% charge remaining
6. The external battery has the same capacity as the EasyPulse POC’s internal battery and will offer similar battery runtimes

Use & Storage Of EasyPulse External Battery

• In order to prolong the life of the battery, it is best to charge the battery frequently rather than waiting until the battery is fully discharged
• When storing for long periods of time without use (> 1 month) be sure to charge the battery to around 50% charge level to prolong life of battery

Disposal Instructions

• This device may contain electrical components that are hazardous to the environment. Do not dispose device into standard trash. Contact your local Waste Management for disposal of Electronic Equipment.

EasyPulse Oxygen Concentrator External Battery User Manual

What to buy with Oxygen Concentrator External Battery

• Precision Medical EasyPulse Portable Oxygen Concentrator Carry Bag
• Precision Medical EasyPulse Portable Oxygen Concentrator Cannula
• Precision Medical EasyPulse Portable Oxygen Concentrator Power Supply