Pari Sinus Pulsating Aerosol System

Features of Pari Sinus Pulsating Aerosol System

• Targeted delivery of medication directly to the sinuses
• Deposits significantly more medication into the sinus cavities vs. nasal sprays
• Less medication required = lower side effects

What are the benefits of using a Sinus Pulsating Nebulizer?

• Pari Sinus Pulsating Aerosol System are easier to utilize when user experiencing an asthma attack because you don't have to take deep breaths.
• At the same time, multiple medications can be delivered.
• A nebulizer may be more comfortable to use with young children.

Pari Sinus System Parts:

1. Pari Sinus Compressor
2. Pari LC Sprint Sinus Nebulizer
   • (2a) Nebulizer Upper Section
   • (2b) Nozzle Attachment (orange)
   • (2c) Nebulizer Lower Section
3. Vibration Connector
4. Soft Nose Plug
5. Nasal Adapter
6. 45 Degree Elbow
7. Vibration Tube “Male” Connector
8. Air Tube “Female” Connector

 

What to buy with Pari Sinus Nebulizer

Pari Adult Aerosol Mask

Smartsilk Asthma and Allergy Friendly The Pillow Protector

The Breather Respiratory Muscle Training Device

 

How to use Sinus Pulsating Aerosol Compressor Nebulizer System?

How to set up Pari Sinus Pulsating Compressor System?

1. Insert the power cord into the power cord receptacle at the rear of the appliance and then into a suitable wall socket.
2. Unwind the tubing. Insert the male connector of one tube with a slight twist into compressor marked “AIR”.
3. Insert the female connector of the other tube with a slight twist into the compressor outlet marked “VIBRATION”.

How to set up Pari Sinus Nebulizer System?

1. Make sure the nebulizer has been cleaned and/or disinfected before fi rst use and after last treatment of the day. Refer to the “Cleaning and Disinfecting the Nebulizer”.
2. Open the inspiratory valve cap by lifting up the hinged cap.
3. Pour prescribed medication into the nebulizer cup. Do not fi ll past the maximum fi ll line. Caution: Medication maximum fi ll for Pari LC Sprint is 8 cc (ml).
4. Close the inspiratory valve cap by pressing down on the hinged cap.
5. Connect the nasal adapter to the elbow and insert the other end into the nebulizer outlet.
6. Hold the nebulizer upright.
7. Insert the “male” adapter of the vibration tube into the vibration connector.
8. Attach the “female” adapter of the air tube with a slight twist onto the air intake on the bottom of the PARI LC SPRINT SINUS nebulizer cup.
9. To set down, insert the nebulizer into the nebulizer holder provided for this purpose on the compressor.

Pari Sinus Nebulizer System User Manual

How to do the sinus treatment?

1. Take your treatment as directed by your physician or healthcare professional.
2. Sit in a relaxed, upright position and hold the nebulizer upright.
3. Gently position the nasal adapter into one nostril so the nostril is closed tightly. Position the soft nose plug into the other nostril. It will remain in place once inserted. A soft nose plug has a small opening to ensure defined resistance.
4. Close off the lower airways. Tips for closing off the lower airways, see below.
5. Switch the compressor on.
6. The aerosol is automatically delivered into the nasal sinuses. During treatment do not breathe in and out through either the nose or mouth. Take short pauses when necessary and breathe normally through the nose or mouth.
7. Give equal time to both nostrils: at least 2.5 minutes each side. The treatment is over when the nebulizer begins to sputter.

Caution: Do not block small openings in nose plug during treatment.

How to clean Pari Sinus Compressor Nebulizer Aerosol System?

• Disconnect the air tube from the air intake on the bottom of the nebulizer cup and the vibration tube from the vibration connector.
• If there is any moisture (condensation) in the tubing, let the Pari Sinus compressor run with only the tubing attached (to the compressor) for 2-3 minutes. The warm air from the Pari Sinus compressor will dry out the tubing. Alternatively, you can dry the tubing by removing it from the Pari Sinus compressor and hanging it up with the “ends down” to allow the moisture or condensation to drain out and evaporate. Use a clean damp cloth to wipe the exterior of the tubing.
• Disassemble the Pari LC Sprint Sinus nebulizer parts as shown in Illustration 1.
• Wash all Pari LC Sprint Sinus nebulizer parts with warm water and liquid dish soap. Do not wash the tubing.
• Rinse the Pari LC Sprint Sinus nebulizer parts thoroughly with warm water and shake out water.
• Air dry or hand dry Pari LC Sprint Sinus nebulizer parts on a clean, lint free cloth. Reassemble nebulizer when parts are dry, then store for future use.
• You can also wash the Pari LC Sprint Sinus nebulizer parts in the top shelf of a dishwasher. Do not wash the tubing. Place the Pari LC Sprint Sinus nebulizer parts in a dishwasher basket and place the basket on the top rack of the dishwasher. Remove and dry parts when the dishwasher cycle is complete.