Open-Air Stax Finger Splint Sample Kit

What does Open-Air Stax Finger Splints Sample Kit Include?

• Size 0 Finger Splints
• Size 1 Finger Splints
• Size 2 Finger Splints
• Size 3 Finger Splints
• Size 3-1/2 Finger Splints
• Size 4 Finger Splints
• Size 5 Finger Splints
• Size 5-1/2 Finger Splints
• Size 6 Finger Splints
• Size 7 Finger Splints

What to buy with Stax Finger Splints

• Norco Finger Sleeve
• Aluminum Padded Finger Strips
• North Coast Medical Fabrifoam Finger Slings

How to use Stax Finger Splint Sample Kit?

1. Small flare adjustments can be made to accommodate edema by using a heat gun.
2. Using pliers, hold the splint 1" (3.2cm) away from the heat gun and rotate the splint for 20 to 40 seconds.
3. Make necessary adjustments.
4. Allow to cool completely before application.
5. Thread Velcror loop through the two slots located at the end closest to the PIP joint.
6. Velcror straps are available as convenient precut straps with adhesive hook.
7. Peel away the backing and attach adhesive Velcror hook in between slots on the outside of the splint.
8. Trim strap as needed.

Open-Air Stax Finger Splint Sample Kit User Guide

Stax Splint care instructions:

1. Wash in warm water with mild soap.
2. Dry with a cloth.