Note:- This product is incomplete and can not be sold without Kaye Suspension Harnesses

Kaye Suspension Conversion Kits Without Harness for Posture Control Walkers

Brand/Manufacturer: KAYE PRODUCTS, INC.
Item # Desc Pkg Price
SC1 For W1/2B and W1B Walker Series $7.09
SC2 For W2B Walker Series $7.09
SC3 For W3B Walker Series $7.29
SC4 For W4B Walker Series $7.29

Kaye Suspension Conversion Kits Without Harness for Posture Control Walkers attaches to existing B-series posture control walkers and allows these walkers to function as partial weight-bearing or suspension walkers. The walkers can fold with the suspension kits attached, to facilitate storage and transportation.

Features of Kaye Suspension Conversion Kits Without Harness for Posture Control Walkers

  • Easily removable to allow the posture walkers to be used independently.
  • Available in 4 sizes, for toddlers through smaller adults.
  • Four harness sizes are available but sold separately.
  • The narrower width of these units allows greater maneuverability indoors, but in order to fit over a treadmill, it will be necessary to place the walker on the Treadmill Width Adapter
Kaye Suspension Kit User Manual

What to buy with Kaye Suspension Conversion Kit

How to use Kaye Suspension Conversion Kits Without Harness for Posture Control Walkers

The Kaye Suspension Kit Walkers Accessory for Posture Control Walker is designed as a reverse or posterior walker, where the user faces away from the rear bars and towards the open end of the walker. These walkers are designed to facilitate postural alignment, balance, and components of gait through the following means (as compared to traditional, forward walkers):
  1. The support behind the user encourages a more upright posture.
  2. The handgrips beside the user encourage improved upper extremity position.
  3. The centering of the user within the walker and over his own feet encourages the development of balance.
  4. The rear horizontal bars encourage the user to step forward as he moves the walker forward.
  5. Pulling the walker helps eliminate the abnormal two-footed stance when a user must stop and move the walker further to their front

How to adjust the parts of Kaye Posture Control Walkers?

Folding and unfolding Kaye Posture Walker

  • To unfold the walker, pull the handgrips away from the rest of the frame, and the walker should begin to unfold. Continue to unfold the frame until the latch pushpins extend and lock .
  • To fold the walker, face it from the open-end, depress the latch push-pins, tilt the walker so that it rests on its rear legs only, and push the front legs towards the rear legs.

Assembling Posture Walkers

Some walkers are shipped with the legs removed. Install the legs as follows:
  1. The front legs have wheels that rotate in both directions. Install the front leg with the orange sticker into the front, left side of the frame. Install the other front leg into the front, right side of the frame.
  2. Install the rear legs with tips so that the bend points the tip towards the front of the walker.
  3. The rear legs with wheels have wheels that rotate in only one direction. Install the rear leg with the orange sticker into the rear, left side of the frame. Install the other rear leg into the rear, right side of the frame.

Height Adjustment of Posture Control Walkers

Adjust the height of the walker so that the top, rear bar is aligned with the middle of the user's buttocks. To do this, press the pushpin on each leg and slide the leg up or down as needed. After installing or adjusting the legs, always check the following:
  1. All four extensions must be adjusted to the same height.
  2. The pushpins must protrude fully from the adjustment holes.
  3. The wheels should face towards the outside of the walker.
  4. If you have rear legs with tips, the bend should point the tip towards the front of the walker.
  5. If you have swivel front wheels, the plates should be parallel with the ground and protrude from the walker.
  6. If you have rear wheels, the locking mechanism on the rear wheels should prevent the walker from rolling backwards.

Unlocking and Locking the Swivel Wheels of Body Weight Support Walker

  1. To unlock the front wheels so that they swivel, rotate each swivel latch around and down, until it rests against the bolt that serves as an axle for the wheel.
  2. To prevent the wheels from swiveling, first, point the wheel straight ahead. Then rotate each latch around and up until it is seated fully into the slot located in the plate above the wheel.

Adjusting Alignment, Swivel Wheels of Suspension Conversion Kit for Posture Control Walkers

Adjust the alignment of the swivel wheels as follows:
  1. Ensure that the swivel caster is locked.
  2. Use 1/2” wrenches to loosen bolt “X”.
  3. Point the caster assembly in the desired direction.
  4. Securely tighten the bolt.

Adjusting Non-swivel wheels, front and rear of Posture Walkers

Use 9/16” wrenches to adjust the optional, silent rear wheels. Use 3/4” wrenches to adjust the front, “all-terrain” wheels. Use 1/2” wrenches to adjust all other wheels. A flat-head screwdriver may also be needed. Adjust the alignment of the non-swivel wheels, front or rear, as follows:
  1. If a bolt head, which is located on the outside of the wheel, is concealed by a plastic cover, remove that cover. To do this, insert the tip of a flat-head screwdriver just under the edge of the plastic cover and gently pry the cover off of the metal flange. The bolt head should then be visible.
  2. Secure the bolt head on the outside of the wheel so that it does not turn.
  3. Loosen the nut that is located on the opposite side of the leg as is the wheel.
  4. If you have silent rear wheels, you may also need to loosen the nut between the leg and the wheel. To do this, move that nut away from the leg. (It may be necessary to rotate the bolt head in order to loosen this nut).
  5. Adjust the alignment as desired.
  6. Move the wheel up or down to ensure the walker is level.
  7. Secure the bolt head that is on the outside of the wheel so that it does not turn.
  8. Identify the nut that is on the opposite side of the leg as is the wheel. Securely tighten that nut into the tube.
  9. If you have silent rear wheels, identify the nut that is between the wheel and the tube. Securely tighten that nut into the tube.

How to care and maintain the Suspension Conversion Kit for Posture Control Walkers?

  1. Inspect the walker regularly.
  2. Tighten the nuts and bolts as necessary.
  3. If a product needs service or spare parts, contact Kaye Products, Inc. or the dealer from whom you purchased the item.
  4. If a problem is discovered that may impact the product’s function, immediately cease use and contact Kaye Products, Inc.
  5. he wheels and crutch tips will wear and should be replaced as needed.
  6. The ratchet or brake mechanisms on the rear wheels will wear and should be replaced, as needed, in order to maintain the rearbraking feature. Dirt, trash, or ice build-up on the ratchet mechanisms may prevent them from functioning.
  7. If your walker has the rear wheels with silent, one-way bearings, care should be taken to avoid exposing these bearings to salt or salt water.
  8. Use water and, if needed, soap to clean the walker.
  9. Avoid any undue stress to the walker while using, storing, or transporting it.


  1. Not for the elderly.
  2. Each time you unfold or adjust the walker, ensure that pushpins fully extend from their corresponding holes.
  3. Do not use with broken or missing parts.
  4. Do not use on stairs, steep slopes, or steep ramps.
  5. Do not exceed the size and weight limits.
  6. Do not alter the product or use it in any the way other than described herein.
  7. Never leave a child unattended.
  8. Always use qualified supervision

Specifications of Kaye Suspension Conversion Kits Without Harness for Posture Control Walkers

Model Number Fits Kaye Posture Control Walker Models Weight Limit
SC 1W1/2B, W1/2BR(X), W1/2BS(X), W1/2BH, W1/2BHR(X), W1/2BHS(X), W1B, W1BR(X), W1BS(X), W1BH, W1BHR(X), W1BHS(X) 60lb (27kg)
SC 2W2B, W2BR(X), W2BS(X) 85lb (38kg)
SC 3W3B, W3BR(X), W3BS(X) 130lb (59kg)
SC 4W4B, W4BR(X), W4BS(X) 180lb (82kg)

Warranty of Kaye Suspension Kit for Control Walkers

  • If an item proves defective within two years of the original purchase, we will provide you with replacement parts in order to correct that defect. Wear and tear, and the items listed under MAINTENANCE AND CARE are not covered by the warranty.
  • Kaye Products, Inc. makes no other warranty expressed or implied, and does not warrant the product as being fit for a particular purpose. The purchaser, owner, and the user assumes all risk of personal and property injury due to the use of the equipment.

Customer Reviews


ItemName - now     10/18/2021

  Your question will show here once it will get approved.

UserName - now     10/18/2021

  Your Answer will show here once it will get approved.


{{x.ShortDescription}} ...

What is HPFY’s return policy?

Customer satisfaction is our top priority. We stand behind our products. If the merchandise you received is defective or not what you expected it to be, and you wish to return the item, please submit a return request in the My Account section of our website, contact our Customer Service department at (866) 316-0162 / (203) 616-2850 or email us.

  1. Merchandise must be returned within 30 days of the receipt of your order. Returns are not accepted after 30 days.
  2. Items (including parts and accessories) must be returned in new, unused, and resalable condition in its original packaging.
  3. Before returning any product, the buyer must obtain a Return Authorization Number (RA#) from a customer service representative. With your RA# you will receive a prepaid return shipping label.
  4. Orders returned without obtaining an RA# will be entitled to receive only "In-Store Credit" that can be used towards future purchases.
  5. Return orders are subject to a 20% restocking fees.
  6. All custom orders and hygienic items are non-returnable. Refer to the “Non-Returnable Items” section for further details.
  7. Returns will be reviewed and inspected before issuing credit. Please allow 3 to 4 weeks for processing. The credit will be applied to your original method of payment.
  8. If the return is the result of a defective product or shipping error, we will refund the entire purchase amount and return shipping costs.

Which products are Non-Returnable?

Due to the hygienic nature of some items, they are non-returnable. The items listed below are non-returnable:

  1. All hygienic items.
  2. Opened personal care items.
  3. Anything opened, used, or tried on.
  4. All customized items.
  5. Besides these, items that have the “non-returnable” phrase on the website.

We reserve the right to make adjustments due to errors, changing market conditions, product discontinuation or typographical errors in advertisements. Images on the site may not always reflect the actual product. Footrests or leg-rests are not included with wheelchairs unless specified.

How do I receive a return authorization number?

You can submit a return request by logging into your account. You will receive the Return Authorization Number (RA#) details in the email within 2-3 business days.

  • Login to your account
  • Go to “order history”
  • Click on “return order”
  • Fill out the return form and Submit it

If you do not have an email address, we will make other accommodations for RA# Details. Write the RA# on your label affixed to your package prior to shipment.

How long does it take to receive a refund?

Please allow 3 to 4 weeks to process the returns. Once the item is received, and inspected, your refund will be processed and automatically applied to your credit card or original method of payment.

Is there any Restocking Fees?

  1. 20% restocking fees will be applied.
  2. Outbound shipping cost is non-refundable.
  3. For orders that qualified for free shipping, $8.99 will be deducted from the refund if the product is returned.

More Walker Accessories

{{'Buy ' + x.Name}}
${{ x.OurPrice | currency: "" : 2}}
Please enter your and your friend's email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using