Homecraft Savanah Modular Bath Step

Savanah Modular Bath Step Features

• Attractive and specifically designed to make daily activities easier
• Comfortable step which is pleasant on the feet
• Surface area: 14"W x 18"L (356mm x 457mm)
• Footprint: 15"W x 19"L (381mm x 483mm)
• Weight capacity: 418lb
• Each additional step adds an extra 2" to the height of the step (not included)
• Up to a maximum of 6 steps (giving a 14") raise
• Note: This item cannot be returned or exchanged due to hygienic reasons
  

How to use Savanah Modular Bath Step?

• Remove the bath step and pad from the packaging.
• Fit the plugs (attached to the underside of the step) into the holes in the center of the step.
• Attach the self-adhesive, slip-resistant pad-
  - Ensure the step is dry and free from dust and grease.
  -Peel off the backing sheet along one long edge of the pad and align it with the recess in the top of the step.
  -Once fitted squarely in the recess, pull off the rest of the backing sheet and smooth down the pad.

• Clean with warm water and mild detergent or household disinfectant.

• Ensure all the top steps are assembled with the plugs and pad fitted correctly before use.
• Do not stack steps more than 6 high.
• Maximum user weight 190kg / 30st.
• Do not use on a wet floor.
• Replace the foam pad when it becomes worn or ingrained with dirt as this may reduce the effectiveness of the slip-resistant surface.