Grafco Premium Dual Function Stimulator Features
- Graham-Field Grafco Premium Dual Function Stimulator Kit Includes:
- GF-DF5 Dual Channel Electrical Stimulator Device
- 2 electrode lead wire
- Four (4) 2" x 2" (50 mm x 50 mm) adhesive electrode pad
- Operation manual
- Lanyard (can be used to hang device from lanyard hole)
- Carrying Case
- Three (3) 1.5 V AAA Battery ( Required for operation, but not included with the device)
- Sleek design with side indentions for easy handling dual channel
- 20 Levels of intensity
- LCD Panel
- 3 AAA batteries (not included)
- One (1) year limited warranty
- Tens and EMS:
- TENS is clinically tested and approved with the following applications:
- Symptomatic relief of chronic intractable pain
- Post traumatic pain
- Post surgical pain
- EMS Intended Use (Indications):
- Relaxation of muscle spasm
- Increasing local blood circulation
- Prevention or retardation of disuse atrophy
- Muscle re-education
- Maintaining or increasing range of motion
- Immediate post-surgical stimulation of calf muscles to prevent venous thrombosis
How To Operate Grafco Dual Function Stimulator?
Turn the Device ON
- Press the POWER button to turn on the device; the LCD will show.
Select the Treatment Mode
- While in the standby mode, press either the TENS button to select the TENS treatment mode or the EMS button to select the EMS treatment mode.
Select the Treatment Program
- After pressing the TENS button to select TENS treatment mode, press the TENS button again to select the treatment program. The stimulator has five TENS programs.
- After pressing the EMS button to select EMS treatment mode, press the EMS button again to select the treatment program. The stimulator has five EMS programs.
Adjust the Treatment Intensity
- Press the Intensity Control button ([+] or [-]) to control the intensity output. The left [+] and [-] button control the CH1 channel intensity, and the right [+] and [-] button control the CH2 channel intensity.
- When increasing the intensity, each click of the [+] button increases the output intensity of the selected channel by one level, which will show on the LCD. The stimulator has twenty levels of intensity. Adjusting the intensity may cause a tingling sensation; adjust the intensity to a level that is comfortable to you.
- When decreasing the intensity, each click of the [-] button decreases the output intensity of the selected channel by one level, which will show on the LCD.
Warning:
- If the stimulation levels are uncomfortable or become uncomfortable, reduce the intensity to a comfortable level. If problems persist, contact your healthcare professional.
Stop Treatment
- To stop treatment, press the POWER button ( ) to turn the device off.
Load Detect Function
- When the device hasnt detected load (i.e., an electrode is loose or off, resulting in no current), it will be assumed there is no load, the intensity will automatically return to zero, and the device will return to standby mode.
Grafco Dual Function Stimulator Specification
Particulars |
Specifications |
Device Name |
Dual Channel Electrical Stimulator |
Model |
GF-DF5 |
Power supply |
DC 4.5 V, three 1.5 (AAA) batteries (not included) |
Output channel |
Dual, isolated between output channels |
Wave sharp |
Bi-directional square-wave pulse |
Output voltage |
Maximum 40 Vpp (at 500 O load) |
Output current |
Maximum 80 mA (at 500 O load) |
DC capacity of output |
0 |
Treatment time |
20-30 min. |
Output intensity |
0 to 20 levels, adjustable |
Treatment mode |
TENS, EMS |
Number of treatment programs |
TENS: five programs
EMS: five programs |
Operating conditions |
41°F - 104°F (5°C - 40°C), 30% - 75% RH, 700 hPa - 1060 hPa atmospheric pressure |
Transportation and storage environment |
14°F - 122°F (-10°C - 50°C), 10% - 90% RH, 700 hPa - 1060 hPa atmospheric pressure |
Dimensions (L x W x H) |
4.33 in. x 2.34 in. x 1.18 in. (110 mm x 59.5 mm x 30 mm) |
Weight (without batteries) |
0.1 lb (45 g) |
Automatic shutoff |
3 min. |
Electrode detection function |
When amplitude level =1 and an open circuit at either channel is detected, amplitude level will be reset to 0 V |
Output precision |
All output parameters allow ±20% error for the specification |
Grade of waterproof |
IP22 |
Electric shock |
Internally powered ME equipment |
Applied part, entire unit |
Type BF applied part |
Mode of operation |
Continuous operation |
Device service life |
Two years (Normally) |
Warranty
1 Year Limited Warranty
Related Articles
{{x.ShortDescription}} ...
Share