Four Level Communication Builder

Four Level Communication Builder

Brand/Manufacturer: ENABLING DEVICES


This product is on backorder and will be available to purchase once it is back in stock.

Four Level Communication Builder is equipped with five easy to change frames, which allows one to refine communication choices as the person develops new skills. It retains the recordings on all four levels when switching back and forth between the 1, 2, 4, 8, and 16 window frames. It is light, durable and easy to carry with a built in handle.


  • Four Level Communication Builder requires 4 AA batteries
  • Frame size: 8-1/2" x 7"
  • Size: 12-1/2"L x 9-1/4"W x 4"H
  • Maximum message length is 4 seconds
  • Total recording time is 300 seconds
  • Weight: 2-1/4lb

More Information

  • Operation:
    - Carefully turn the device over to reveal the battery compartment. A small Phillips head screw must be removed from the battery compartment cover in order to open it. Observing proper polarity, install four AA alkaline batteries into the holder. Close battery cover and replace screw
    - Place your icon grid over the black message pad area then install the appropriate number window frame. Next turn your Frame selector knob to the appropriate setting. Please note pre-made grid layouts can be made with Mayer-Johnsons Boardmaker program
    - Turn the unit on by turning the ON/OFF/VOLUME knob into the ON position. You will hear a slight audible click as you turn the knob
    - The microphone is located on the back of the unit next to the red RECORD button. To record, depress and hold the RECORD button first, then depress one of the message pads simultaneously and speak into the microphone (your mouth should be approximately 4-6 from the microphone). Release both buttons once recording is over. Playback your message by pressing and releasing the same pad used to record. Each of the remaining message pads can be programmed in the same manner. (The unit will retain recorded information indefinitely, even if the batteries are disconnected. Previously stored information will be erased only when a new recording is performed on the pad.)
    - Adjust playback volume by rotating the on/off VOLUME control knob to desired level. Turn the unit off by rotating the VOLUME control knob counterclockwise until you hear an audible click
    - Using the LEVEL knob, select level 2. Repeat steps 2 and 3
    - Repeat procedures for remaining levels
  • Important Notes:
    - You can use different window settings for each level. (E.G.) you can use a four window grid on level one and then go to level two and use a 16-window grid. Total record time for each message will be 4 seconds regardless of what window frame you have chosen
    - The 4 Level Communication Builder will shut off automatically after playback to preserve battery life. However, this device still drains a very small current in this sleep mode. Turn the power off when not in use. Doing this can extend overall battery life. Batteries should be removed during long time storage as they may leak and damage the unit
    - The unit may be wiped clean using mild detergent and water on a damp cloth. Do not submerge the unit in water

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory


The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using



Also available:

${{ x.OurPrice | currency: "" : 2}}

Articles & news

Related Articles


{{x.ShortDescription}} ...

Questions & Answers

Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.