EZ Stand-N-Go Adjustable Stander Features
- EZ Stand-N-Go Adjustable Stander helps to stand safely from any couch, chair, or recliner
- People who have trouble standing from a couch, chair, or recliner, the EZ Stand & Go from Stander can help user stand with confidence; without having to buy an expensive lift chair
- Low-profile to match the look and feel of your home
- Adjusts in height, width and depth to ensure comfort on any cushion. The cushioned handles and legs can easily be adjusted in height to fit both your chair and your personal preference.
- Universal aid to daily living – can go on fixed, stitched, or removable cushions; Frame goes on top of fixed or stitched cushions, or goes underneath removable cushions
- Fully adjustable in height and depth
- Chair Type: Fully adjustable to fit most couches, chairs, and recliners
- Handle Height From Floor: Adjustable from 22" - 32"
- Width Between Handles: Adjustable from 19" - 26"
- 23 to 26 inches adjustable depth 23" - 26"
- 19 to 26 inches adjustable width
- One inch tube diameter
- Made of powder coated steel
- Weight Capacity: 300lbs
What to buy with Stander
How to assemble Stand N Go Stander?
1. Remove all parts from the box and become familiar with each item as shown in Figure 1.

2. Before assembling the product, determine if the frame of the product will be placed on top of the cushion or below the cushion. Then determine the desired height of the handle, and the width and depth of the assembled frame to fit your chair, recliner or couch.

3. Insert the Handle Assemblies into Support Assemblies and adjust the Handle Assemblies to the desired height. Secure the Handle Assemblies using Square Bolts and Round Nuts as shown in Figure 3.

4. Insert the Base Tubes into the Support Assemblies. Adjust the Base Tubes to the Frame Depth that will fit your chair, recliner, or couch and secure the Base Tubes with the Square Bolts and Round Nuts as shown in Figure 4.

5. Insert the Base Tubes into the Base Connector Tube. Adjust the Base Tubes to the Frame Width that will fit your chair, recliner, or couch and secure the Base Tubes with the Square bolts and Round Nuts as shown in Figure 5.

6. Position the product on your chair, recliner, or couch and depress the Spring Pins to adjust the Leg to the floor as shown in Figure 6.

EZ Stand-N-Go Stander FAQ's
Q. Can EZ Stand-N-Go fit most couches?
Yes, it’s fully adjustable to fit most couches, chairs, and recliners
Q. Can Stand-N-Go Stander fit my recliner?
Yes, and because the legs are extended out, you can still lift your recliner.
Q. Is EZ Stand-N-Go height adjustable?
Yes, it can be adjusted in height from 22? – 32? to fit most couches and recliners
Q. Is Stand-N-Go easy to assemble?
Yes, and no additional tools are required.
EZ Stander Safety Precautions
- Serious injury or harm can result if the product is not properly installed
- Regularly check the product to make sure the Square Bolts and Round Nuts are secure
- Make sure the adjustable legs are always in contact with the floor.
- Additional safety measures should be taken for users that are a high risk. High risk users include those who are not mentally conscious (including those individuals under medication), users who have size or weight conditions, or any condition that impair their ability to use the product without assistance.
- If you are suffering from an ailment or injury or are taking medications that affect your balance or ability to stand or sit down, you should first consult with a physician before using this product. If the product is not used properly, serious injury or harm could result.
- The product was not intended to carry the full weight of an individual. This product is only intended to provide balance and support while sitting and standing.
- Children should not be allowed to hang on or play with the product.
Specfications of EZ Stand-N-Go
Particulars |
Specifications |
Weight Capacity |
300lbs |
Chair Type |
Fully adjustable to fit most couches, chairs, and recliners |
Handle Height From Floor |
Adjustable from 22? – 32? |
Width Between Handles |
Adjustable from 19? – 26? |
Base Dimensions |
Adjustable Depth 23? – 26? and Adjustable Width 19? – 26? |
Tube Diameter |
1? |
Dimensions |
23? – 26? x 19? – 26? x 22? – 32? 8.5lbs |
Case of 5 Dimensions |
25.5? x 21.25? x 12.5? 42.5lbs |
Made of |
Powder Coated Steel |
EZ Stand-N-Go 2200 Stander Warranty
Lifetime Warranty
{{x.ShortDescription}} ...
Share