DeVilbiss IntelliPAP 2 Standard Heated Humidifier

Features

• DeVilbiss IntelliPAP 2 Standard Heated Humidifier includes:
  - Humidifier Cradle
  - Water Chamber
• Different Levels of Humidity
  -Standard heated humidifier is designed to offer a range of humidification options
  - Level 1 is the lowest dose of humidity, while Level 5 is the highest
  - Wave symbol located on top of the IntelliPAP 2 machine lights up to represent the functioning humidifier
  - Humidification is not desired, the option may be turned OFF
• Compact Design Aesthetic
  - Machines and heated humidifier are designed to join together to create a minimal footprint
  - Stack the cream colored machine on top of the humidifier cradle
  - Then, place the water chamber within the cradle to ensure the device is ready for use
  - Design makes the combination of the machine and humidifier taller as opposed to longer
  - Pieces may be separated for ease when cleaning or traveling
• NOTE: Prescription can be faxed to 1.203.616.2851 or emailed to [email protected]
  
• Also available (sold separately):
  -DeVilbiss IntelliPAP 2 AutoAdjust Auto CPAP Machine (Code : DV64D)
  DeVilbiss IntelliPAP 2 AutoAdjust Auto CPAP Machine With Heated Humidifier (Code : DV64D-HH)
  

More Information

• Air Supply Port Cover
  - When the IntelliPAP 2 machine and humidifier are connected, the air supply port cover folds into the circular crevice located on the back of the machine
• Water Chamber Cleaning Tips
  - The water chamber for the IntelliPAP 2 Heated Humidifier needs to be cleaned daily
  Note: The water chamber may be placed in the dishwasher for an occasional cleaning
  - When placed in the dishwasher, the chamber must sit on the top rack
   For all other daily needs, hand wash the chamber with warm water and mild soap
  
• Steps to withdraw the chamber
  - Gently press on the chamber release latch which is located at the front of the chamber
  - Slide the chamber out of the cradle
  - Locate and push forward on the chamber disassembly lever which is directly behind the chamber release latch
  - The chamber will open into two halves
• Cleaning Tips for the Humidifier Cradle
  - The cradle which holds the water chamber should be cleaned weekly
  - Note: The cradle should not be submerged in water
  - Instead, use a moist cloth to wipe the exterior of the unit
• Steps when preparing to clean the cradle
  - Remove the power source to allow the heater plate to cool
  - The cooling process may take up to 10 minutes
  - Once cooled, withdraw the water chamber from the inside of the cradle
  - Use the flow generator release button to separate the IntelliPAP 2 machine from the cradle base
  - Use a moist towel to cleanse the cradle
• Instructions for Filling the Water Chamber
  - When refilling the water chamber, use distilled water to help prevent mineral build-up
  - The IntelliPAP 2 water chamber has water level indicators located on the sides and top of the chamber
  - Do not surpass the specified markings when refilling the chamber, as it may cause water damage
• Sealing Gasket Maintenance
  - Before each use, examine the sealing gasket surrounding the circumference of the chamber
  - Ensure the gasket has been put back into place after each cleaning