BioMedical Micro Plus Microcurrent Electrical Nerve Stimulator

Micro Plus Microcurrent Electrical Nerve Stimulator Benefits

• Unlike traditional TENS units, MicroCurrent (MENS) output is lower. Therefore the stimulation is often not “felt” or perceived by the patient but works on a cellular level to repair cells by releasing ATP (Adenosine triphosphate) to transport energy within cells for metabolism.
• Uses extremely small pulsating currents of electricity.
• Adjustable Pulse Rate 0.5-120Hz.
• Pulse Duration 1-3s.
• Micro and Milliamp control.
• The microcurrent unit is powered by one 9-volt battery.
• The pulse rate or Frequency is 1-120Hz.
• The carrier frequency is 14000 Hz.
• Three polarity settings are positive, negative, or bipolar.
• Unit Dimension - 3.9" x 2.75" x 1" (9.90cm x 6.98cm x 2.54cm)

Micro Plus Microcurrent Electrical Stimulator Spec Sheet

What to buy with Micro Plus Microcurrent Stimulator

• BioMedical Touch Proof Replacement Lead Wires
• BioMedical BioStim PigTail Electrodes
• BioMedical Electrolyte Solution And Skin Prep Spray

Why choose BioMedical Micro Plus MENS Device over TENS Devices?

• TENS devices use a larger current called “Milliamp,” while Microcurrent devices use a much lower current called “Microamp.”
• Microampere (uA) is one-millionth of an amp, while a Milliamp (mA) is one-thousandth of an amp.
• Although users can feel a TENS sensation, you’ll never feel a Microcurrent sensation.
• TENS devices block pain signals to the brain and are used for pain relief. Microcurrent devices also offer pain relief and stimulate healing simultaneously on a cellular level.

How does Microcurrent work?

• Microcurrent units produce electrical current just above the levels of the electrical exchanges that naturally occur at a cellular level in the body. This is why Microcurrent is readily accepted by the body’s cells when applied using electrodes.
• Microcurrent therapy restores lost positive and negative electrons. These electrons are essential to every living cell. The body uses these minute electrical currents to accelerate its healing agenda.
• When cells are damaged, they become electrically imbalanced. Electrical current naturally takes the path of least resistance through the body, which means the body’s electrical current will go around the injury rather than through the injured area and will take some time to heal damaged cells.
• By applying Microcurrent to the site of an injury, the Microamp current can pick up where the body fails. Through regular Microcurrent treatments, Microcurrent therapy can gradually close the gap and help heal the damaged area, shortening recovery time.
• Microcurrent electrical stimulation uses Microamp, a level of electricity that closely mimics the electrical status of the body’s cells. This application of Microcurrent helps to re-balance a cell’s electrical current. This returns damaged cells to a normal state, initiates cellular activity, and increases ATP levels.

ATP (Adenosine Triphosphate)

• ATP transports energy within cells for metabolism. This energy is integral to the function of nearly every cell in the body.
• Research has shown that microcurrent electrical therapy using Microamp can increase ATP production by up to 500%. This is extremely important because injuries often lose ATP supplies when injured.
• Unlike other forms of electrotherapy, Microcurrent has a cumulative effect on ATP levels. Therefore, higher ATP levels can accelerate the body’s healing process.