Bemis Hi-Flow Rigid Suction Canister with Aerostat Filter

Hi-Flow Rigid Suction Canister Features

• This suction canister comes with Large, easy to read graduations
• Self-sealing lid provides leak-free seal
• Lids contain multiple ports for versatility
• Pour spout, vacuum, tandem and patient ports
• Stepped patient port for direct tubing access
• Designed to meet high volume collection and disposal needs
• Nestable for storage
• Disposable, single use
• Dimensions:
  • Bottom Diameter: 4 Inch
  • Top Diameter: 6-1/8 Inch
  • Height: 7-1/2 Inch

Hi-Flow Rigid Suction Catheter User Manual
 

What to buy with Bemis Hi-Flow Canister

• Neotech Little Sucker Oral-Nasal Suction Devices
• Allied Suction Tubing Kit For Schuco Aspirator
• Precision Medical Easy Go Vac Aspirator Hydrophobic Filter Assembly

Directions to use Bemis Suction Canister

• Gently shake lid to verify shut-off mechanism moves freely
• Place lid on canister and press firmly around entire perimeter
• Take right angle connectors (elbows) out of bags found in lid packages and apply tightly to patient and vacuum ports
• Note: On Hi-Flow models only, the patient tube can be placed directly on patient port without an elbow if desired
• Apply pour spout cap firmly over pour spout and apply tandem port cap tightly over tandem port if not being used
• Attach patient tube to patient port and vacuum tube to vacuum port. Be sure tubing fits snugly
• Check all caps and connections for proper seal. Test the assembly for vacuum leaks by turning on vacuum source and occluding the patient tubing with finger or thumb
• To eliminate fluid contamination in vacuum line, make sure vacuum line is attached to vacuum port

Disposal:

• Turn off vacuum source and disconnect all tubing
• Seal vacuum and patient ports with attached port caps
• Remove canister from bracket and transport to disposal area. Do not lift canister by lid. The weight of the contents may cause the lid to separate from the canister.
• Dispose of according to hospital policy