Moog EnteraLite Infinity Pump Administration Set With ENFit Transitional Connector

EnteraLite Infinity Pump Administration Set Features

• Moog EnteraLite Infinity Pump Administration Set With ENFit Transitional is DEHP free
• The closed reservoir overflow system is designed to help patients with gastric problems, pain, and bloating by providing a channel to decompress the stomach constantly
• All mating adapters meet AAMI guidelines to prevent potentially hazardous situations in connecting to the patient feeding tube
• Latex-free 
• Non-IV Compatible 

What to buy with Infinity Pump Administration Set

• Dale ACE Connector
• Covidien Kendall Kangaroo Joey Screw Spike Set
• Derma NG-Strip Nasal Tube Fastener

How to use Moog Enteralite Infinity Administration Set?

1. Fill the feeding bag to the desired level and close the cap securely.
2. Unscrew the protective cover counterclockwise from the ENFit connector (image A). Note: If the set is to be used with a carry pack, all air must be removed from the bag and tubing. Continue to step #3 for instructions on removing the air. If the set is to be hung above the pump, i.e., on an IV pole, air may remain in the bag. Skip step #4.
3. Turn the bag upside down and gently squeeze. Tilt the bag to keep the air at the tubing port (image B). At the same time, follow the instructions in step #4.
4. Gently pinch the teal-colored tubing below the symbol (image C). Hold this position until the air is expelled from the tubing. Gently squeeze the bag at the same time to assist fluid flow. If the fluid does not flow, the pinch may be too tight.
5. To expel air from tube using pump prime feature, refer to pump and Operator’s Manual for instructions. Note: Priming with the pump is recommended when using thick formulas because it is faster than priming by gravity.
6. Position silicone tubing around pump wheel stretching lightly. Seat cassette into the pump (image D). Close the pump door.
7. Screw the ENFit connector clockwise into feeding tube firmly by hand (image E). Be careful not to overtighten.

 

Warnings & Precautions:

• It is important to keep the air sensor free of debris, including spilled fluids or food that may adhere to the sensor and prevent air detection in the tubing. Use a cotton swab to clean the pathways of the cassette receptacle. (Refer to the pump Operator’s Manual for further cleaning instructions).
• When using a programmed dose, infinite dose, or interval feeding setting, the volume of food in the bag/bottle should be monitored throughout the feeding cycle to ensure the patient has received the appropriate dose.
• Follow manufacturer guidelines related to maximum nutrition hang time.
• Device contains small parts. Dispose of or store connector caps when not in use to avoid choking hazards for children under 3 years.
• Avoid leaving tubing and cords where infants, children, or those deemed at high risk for medical line entanglement, can become entangled. Be aware that if these items become wrapped around a patient’s neck, there is an increased risk of strangulation or death. Caregivers of patients who are at risk for entanglement should discuss with their healthcare provider how to properly manage their lines and properly monitor patients based on their needs while in use.