Save 20% On Your First Autoship Order

Online since 2002 |   866-316-0162

View product option
Image 2 DeVilbiss IntelliPAP 2 AutoAdjust Auto CPAP Machine With Heated Humidifier Image 1

DeVilbiss IntelliPAP 2 AutoAdjust Auto CPAP Machine With Heated Humidifier

Authorized Retailer BadgeAuthorized Retailer


If you have any questions on this product, Click Here to reach out to our staff Respiratory Therapist.

DeVilbiss IntelliPAP 2 AutoAdjust Auto CPAP Machine With Heated Humidifier is a travel-sized CPAP machine designed to automatically adjust pressure during the night. The machine uses multiple techniques to track therapy effectiveness including a SD card, bluetooth technology and SmartCode. Offers a smaller footprint when machine and humidifier are stacked together. The brightness of the controls and the display can be adjusted independently and have both active and standby brightness settings.


  • DeVilbiss IntelliPAP 2 AutoAdjust Auto CPAP Machine With Heated Humidifier includes:
    - IntelliPAP 2 AutoAdjust Auto CPAP Machine
    - Carrying Case
    - 6 Foot Long 15mm Slim Tubing
    - Filter Cover
    - Reusable Filter
    - Disposable Filter
    - SD Card
    - Power Supply
    - Power Cord
    - Manual

  • PureView AutoAdjust Algorithm
    - It is a unique feature used on the machine to detect advanced apnea events such as periodic breathing and flow limitation
    - Uses a logic that understands complex issues, leading to automatic changes in pressure in response to OSA and CSA events
    - Operate between a low and high pressure range, remaining at the lower pressure until an event is detected requiring a higher pressure

  • Large LCD Screen Display
    Increases the visibility of displayed information and pairs with a knob that is turned and pressed for easy navigation of menus and settings
    - The display can also show regular reminders to change filters and clean equipment if desired
    - When on standby, the machine will display a clock and also has an alarm clock function
    - On-Screen Data includes AHI, leak rate and usage information
  • SmartCode Adherence Score
    SmartCode messages begin to display on the screen after the first night of therapy
    - Each code is a uniquely encrypted code holding personal sleep data results
    - SmartCode is intended to help IntelliPAP 2 users become compliant
    - SmartCode Adherence is determined after the machine is used for 30 consecutive days
    - Data can be generated to depict results from1 Day, 7 Days, 30 Days, 90 Days, a cumulative report
  • Bluetooth Capable Technology
    Enable the Bluetooth feature to begin pairing the IntelliPAP 2 to the SmartLink app
    - The SmartLink Data Management System is designed for use on Apple and Android devices
    - To begin using the app, visit the iTunes App Store or the Google Play Store depending on the device
    - Search DeVilbiss SmartLink to locate the SmartLink app
    - Once the app has been downloaded and the Bluetooth option is turned ON, data will begin streaming from the machine to the handheld device
    - The SmartLink app is compatible with iPhone, iPad or iPod touch running Apple iOS 8 or newer and Android smartphones and tablets running 4.0.3 or newer
  • SmartFlex and Adjustable Rounding
    Designed to decrease pressure during exhalation 1, 2, or 3 cm for a more comfortable breathing pattern during therapy
    - Adjustable rounding allows the user to customize the transition between exhalation to inhalation and inhalation to exhalation
    - The machine settings range from 0 to 5
    - Level 0 represents a direct jump in pressure, while level 5 represents the softest transition
  • Ramp Comfort Feature
    Designed to gradually increase therapy to the lower pressure of the auto range over a period of time
    - Between 0 to 45 minutes, the machine will slowly raise the pressure to help the user become acclimated to their therapy so they may fall to sleep with ease
    - The ramp button is on top of the machine and to the right of the humidifier symbol
    - Use the button to start or stop ramp
    Note: If the machine's lower pressure of the auto range is 3, a ramp will not be available
  • Auto Start / Auto Stop
    Allows the user to begin and finish CPAP therapy without manually pressing a button
    - When enabled, place the mask against the face and begin breathing into the mask to start sleep therapy
    - Likewise, remove the mask when waking to stop sleep therapy
    - If it is not desired, the machine is equipped with button to manually control the device
  • Heated Humidifier
    Humidifiers attach to the base of the machine, so only the height is increased with the two are used together
    - Warm, moist air travels through the hose to the mask to provide comfort to the user
    - Standard heated humidifier can be set to a level ranging from 0-5 and will heat to provide that level of moisture all night long during inhalation and exhalation
    - Level 0 provides no heat, while level 5 provides the most heat
  • NOTE: Prescription can be faxed to 1.203.616.2851 or emailed to [email protected]
  • Please click here for:
    - Troubleshooting YOUR intellipap CPAP with heated humidification
  • Also Available (Separately):
    -DeVilbiss IntelliPAP 2 Standard Heated Humidifier (Code: DV6HH)

More Information

  • Air Supply Port Cover
    - When the IntelliPAP 2 machine and humidifier are connected, the air supply port cover folds into the circular crevice located on the back of the IntelliPAP 2 machine
    - If using the IntelliPAP 2 machine without the humidifier, reposition the air supply port cover so it coats the circular opening found on the bottom of the IntelliPAP 2 machine
    Note: The cover must be put back into the opening found on the back of the machine when preparing to reconnect the machine and humidifier
    - If the cover is still protecting the hole on the bottom of the machine, the devices will not fasten
  • Water Chamber Cleaning Tips
    The water chamber for the IntelliPAP 2 Heated Humidifier needs to be cleaned daily
    - Note: The water chamber may be placed in the dishwasher for an occasional cleaning
    - When placed in the dishwasher, the chamber must sit on the top rack
    - For all other daily needs, hand wash the chamber with warm water and mild soap
    - Before cleaning the chamber, the user will need to remove the tank from the humidifier cradle
  • Steps to withdraw the chamber
    Gently press on the chamber release latch which is located at the front of the chamber
    - Slide the chamber out of the cradle Locate and push forward on the chamber disassembly lever which is directly behind the chamber release latch
    - The chamber will open into two halves
  • Instructions for Filling the Water Chamber
    When refilling the water chamber, use distilled water to help prevent mineral build-up
    - The IntelliPAP 2 water chamber has water level indicators located on the sides and top of the chamber
    - Do not surpass the specified markings when refilling the chamber, as it may cause water damage
  • Sealing Gasket Maintenance
    Before each use, examine the sealing gasket surrounding the circumference of the chamber
    - Ensure the gasket has been put back into place after each cleaning
  • Cleaning Tips for the Humidifier Cradle
    - The cradle which holds the water chamber should be cleaned weekly
    Note: The cradle should not be submerged in water Instead, use a moist cloth to wipe the exterior of the unit;
  • Steps when preparing to clean the cradle
    Remove the power source to allow the heater plate to cool
    - The cooling process may take up to 10 minutes
    - Once cooled, withdraw the water chamber from the inside of the cradle
    - Use the flow generator release button to separate the IntelliPAP 2 machine from the cradle base
    - Use a moist towel to cleanse the cradle


Particulars Specifications
Dimensions of Machine  11.7"L x 7.6"W x 3.3"H
Power Supply 65W, 100 - 240V, 50/60 Hz
DC Electrical Requirements 11 - 17 VDC, 5.2 Amps
Pressure Range 3 - 20 cm H2O (0.5cm increments)
Operating Temperature Range 41°F to 104°F (5°c to 40°C)
Operating Humidity Range 15% to 93% RH non-condensing
Operating Atmospheric Conditions 1060 hPa - 700 hPa
Storage and Transportation Temperature Range -13°F to 158°F
Storage and Transportation Humidity Range 15% to 93% RH non-condensing
Sound Pressure Level <26.6 dBA
Sound Power Level <34.6 dBA
Carry Bag Dimensions 11"L x 5.5"W x 8.5"H


3 Year Warranty

Product Videos

Related Articles


{{x.ShortDescription}} ...


Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using