Aqua Creek Pool Bike Components
- Main Frame
- Front Base
- Back Leg
- Adjustable Handlebars
- Adjustable Seat
- Hardware Bag
TidalWave Pool Bike User Manual
What to buy with Aqua Bicycle
How to operate Aqua Creek Underwater Aquatic Exercise Bike
- The Tidalwave Pool Bike was designed for use in and out of the water. To use in water, use the wheels at the front of the bike to roll the bike down the pool wall into the water. Optimal water depth is 3-5 feet (0.9 to 1.5 meters).
- The Tidalwave pool bike can be set to multiple levels of resistance. The resistance adjustment knob is located on the main frame. To increase resistance for a harder workout, turn the knob clockwise. To decrease resistance, turn the knob counter-clockwise.
Note: Always begin pedaling on the easiest level and increase resistance to more difficult settings while pedaling. Never start pedaling at high resistance as you may experience a transmission bind up. However, if this does occur, release the resistance back to easy and begin again.
TidalWave Aquatic Bike Storage Instructions
The Tidalwave Pool Bike is collapsible for easy storage. To fold the frame into the storage position from the riding position, flip the quick latch lever up with your finger and fold the bike up until the lever rod falls into the storage position slot on the frame.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Common TidalWave Exercises
A rider is sitting on the seat with hands gripping the handlebars.
Rider is sitting on seat with hands dangling in the water.
Rider is off the seat, standing and pedaling, with hands gripping the handlebars.
Rider is behind the bike holding the seat kicks legs in a swimming motion.
Rider is on seat with feet hooked under the handlebars. Lean back until back of head hits the water and then return to an upright position, using only your core.
Rider is behind the bike holding the seat, lifts legs up and slowly lowers themselves until their chest hits the seat and then pushes themselves back up.
Underwater Exercise Bike Specifications
||Type 304 and 316 Stainless Steel
||Polyester Powder Coat - Black with Accent color
||316 Stainless Steel
||Stainless steel rod with bronze bushings
||Quick-flip latch for easy storage
||5 height adjustment settings
||3 to 5 (0.9 - 1.5 meters) feet for optimal use
||54-1/4"L x 21-1/2"W x 53-3/4"H
Tidal Wave Pool Bike Warranty
- Three year warranty on frame
- One year warranty for parts and transmission