Graham Field Lumex Non Tilt Composite Overbed Table

Lumex Non Tilt Composite Overbed Table Features

• Graham Field Lumex Non Tilt Composite Overbed Table is easy to assemble
• Molded composite top is a smart alternative to wood, which over time has the potential to crack or peel
• Easy to clean and impermeable to moisture
• Height adjusts infinitely between 28.3" to 41.7"
• Chrome plated "H" base and column for aesthetics and durability
• Twin-wheel swivel casters provide smooth-rolling action, two locking and two non-locking casters
• Supports up to 50 lbs. of dispersed weight
• The casters is 3"
• The overbed table has a 4” clearance from the base to floor

Graham Field Lumex Non Tilt Composite Overbed Table Instruction Manual
 

How To Assemble Graham Field Overbed Table?

The column is telescoping and spring-loaded handle with care during assembly. DO NOT disassemble the column; this could cause serious personal injury.

1. Place table top upside down on a level surface as shown at right. 
2. Position column bracket above table top bracket as shown at right, with holes matched, and lower column onto table top. Insert socket head cap screws through column bracket into table top bracket as shown. Use M6 hex key to tighten the screws.
3. Place the base upside down above the column as shown at right. Install the two large hex bolts through the bolt plate, base, and into column end as shown. Use 5/8 wrench to tighten the bolts. 
4. Note position of casters, facing away from table top, with the two locking casters at the column end of the base. Insert caster bolts into base as shown at right. Screw casters in securely. 
5. Turn The Table upright and place it on the floor.
   Warning: Ensure that the table is assembled as described, and that all components are securely attached, before use.
    

Maintanance:

• Check the fit and tightness frequently of all fasteners, and tighten as necessary, to ensure that the table is securely assembled.

Cleaning:

• To clean: Gently wipe the table with a soft, clean, damp cloth.
  Note: Do not use cleansers that could damage the table;s finish. 
• To wash more thoroughly: Clean with mild soap and water. 
• Dry table with a clean, soft cloth