MIC-KEY Tube Secur Lok Extension Feeding Sets

MIC-KEY Continuous Feed Extension Set With Secur Lok Features

• Comes with a tubing clamp
• Medication port
• Non-sterile
• DEPH-free formulation
• 24 in. extension set with catheter tip
• SECUR-LOK Right-Angle Connector
• 2 Port Y connector
• Individually packaged
• Stoma measuring device ethylene oxide (ETO) sterilized
• Reusable and for single-patient use
• FDA-approved and CE-marked

When to use mic key extension set with secur lok?

MIC-KEY Continuous Feed Extension Set is typically used when an individual requires long-term enteral feeding through a gastrostomy or jejunostomy tube. These sets can be used to connect the MIC-KEY feeding tube to an enteral feeding pump, providing a secure and reliable means of delivering enteral nutrition.

Frequently Bought Together

• Avanos Enteral Syringe With Enfit Connector - Provides optimal delivery of enteral feeding by reducing the risk of tubing misconnections
• Core NelMed G-Tube Holder - Secures G or PEG tubes in place without the need for tape, minimizing skin irritation and discomfort
• AMT Clamp Feeding Tube Clamp Connector - Reduces disconnects between stepped adapters and your feed sets

Also available (sold separately):

• KIMBERLY-CLARK MIC-KEY 14FR Low-Profile Gastrostomy Feeding Tube Kit (code 0120-14-0.8)
• KIMBERLY-CLARK MIC-KEY 16FR Low-Profile Gastrostomy Feeding Tube Kit (code 0120-16-0.8)
• KIMBERLY-CLARK MIC-KEY 18FR Low-Profile Gastrostomy Feeding Tube Kit (code 0120-18-0.8)
• KIMBERLY-CLARK MIC-KEY 24FR Low-Profile gastrostomy Feeding Tube Kit (code 0120-24-1.5)

How to use MIC KEY Feeding Tube Extension Set?

1. Wash your hands thoroughly with soap and water and dry them with a clean towel.
2. Clean the MIC-KEY feeding tube site with an antiseptic solution and let it dry.
3. Remove the cap from the MIC-KEY extension set.
4. Connect the set to the feeding tube by gently twisting it onto the port.
5. Remove the protective cover from the other end of the extension set.
6. Connect the set to the feeding pump or syringe by gently twisting it onto the port.
7. Check the connection points to make sure they are secure.
8. Turn on the feeding pump or slowly push the plunger on the syringe to deliver the liquid nutrition.