Graham-Field Lumex Everyday Hip Chair

Graham-Field Lumex Everyday Hip Chair Features

• Padded full-length arms which make sitting and standing easier
• High density foam in the upholstered seat and back makes sitting more comfortable for longer periods of time
• Anti-slip strip on the adjustable footrest provides added safety and is an assist during repositioning 
• Adjustable height footrest provides greater comfort while sitting.
• Footrest height is easily and securely adjusted by two spring-loaded adjustment knobs located on either side of frame
• Sturdy metal frame and padded seat and back are easy to clean and maintain
• Protected by AEGIS Microbe Shield
• Maximum weight capacity: 350lb evenly distributed
• About AEGIS Microbe Shield:
  The AEGIS Microbe Shield works by chemically bonding itself to the treated surface and rupturing the membranes of any bacteria that it comes in contact with which inhibits the growth and spread of microbial growth.

Lumex Everyday Hip Chair Assembly and Operation Instructions
 

What to buy with Graham-Field High Hip Chair?

• BodySport Neoprene Knee Support
• Rotating Shower Seat

How to assemble Lumex Hip Chair?

• Remove the frame and seat-back assembly from the carton. Stand the Hip Chair upright on all four legs.
• Taking care to support the seat-back assembly so it does not fall when the screws are removed, remove the four screws that secure the seat to the seat support underside.
• Position the seat-back assembly on top of the seat support with the seat facing forward toward the footrest as shown at right.
• Using the long screws in the seat front and the short screws in the seat rear, reinstall the four screws through the frame underside into the seat underside. Tighten the screws.
• Screw the footrest height adjustment knobs into the threaded bushings in the front legs until firmly seated — permit the thread locking compound on the knobs to cure at least 24 hours for maximum retention before using the chair.
• Position the footrest as shown at right and insert its posts into the front leg sockets while operating the height adjustment knobs as described in the Footrest Height Adjustment steps that follow.

How to adjust Footrest Height of Hip High Chair?

1. Pull either footrest height adjustment knobof Bariatric Hip Chair outward and rotate it one quarter-turn to lock the knob in the outward position.
2. Pull the opposite knob outward and rotate it one quarter-turn to lock the knob in the outward position.
3. Adjust the footrest up or down to the desired height.
4. Once the desired footrest height is reached, turn either knob back to unlock the knob and lock the footrest at the desired height.
5. Turn the opposite knob to unlock it and lock the footrest at the desired height.
6. Move the footrest up or down to ensure the footrest is locked in desired position; if not, repeat steps.

Hip Chair Maintenance and Cleaning

• To clean Hip Surgery Chair, wash with a clean, soft cloth dampened with soap and water or a mild household detergent, wipe with a clean, soft cloth dampened with clear water, and dry with a clean, soft cloth.

Warnings

• If the Hip Chair is not properly assembled, personal injury and damage to the Hip Chair could result 
• If components are damaged or missing, contact your GF distributor immediately. DO NOT use substitute parts. Use only Lumex replacement parts. Non-Lumex replacement parts could cause personal injury and damage to the Hip Chair  
• Notice for California Customers- California Proposition 65 -
• This product contains a chemical known to the State of California to cause cancer and reproductive or developmental harm

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov