Prius Healthcare Duet Mattress System

Prius Duet Mattress System Features

• Prius Healthcare Duet Mattress System has user-friendly controls
• Features large LCD display and rapid CPR deflation
• Patient Care mode provides quick maximum inflation within seconds to help transfers and nursing procedures
• Incorporates sensor technology with Auto Mode to continuously monitor the mattress pressure based on patients height and weight
• Lock out function prevents tampering with settings
• Fowler mode gives added support to help prevent bottoming out while patient is in a sitting position
• Low Air Loss, Pulsation, Alternation, Static and Lateral Rotation for outstanding pressure redistribution results
• Highly vapor permeable and oversized pliable quilted nylon top cover providing low shear, friction and moisture protection
• Rapid CPR deflation 2 inch convoluted foam base for additional safety support
• Recommended maximum safe working load up to 600 lbs
• Auto Fowler–no loss of therapeutic benefits in upright positioning
• Auto Set – automatically sets optimal pressure based on weight/height and position Patient Care provides immediate firm surface
• High vapor permeable and quilted nylon cover
• Visual and audio alarms for power failure, bed exit and bottoming out with alarm mute function
• 10 electronic adjustable comfort settings
• Modularized design for air mattress
• Integrated power cable retainer
• Integrated glide sheet to base cover for easy transferring
• Quick CPR deflation within 20 seconds

What to buy with Duet Mattress System?

• Coloplast Woun'Dres Collagen Hydrogel Dressing
• Carex Inflatable Rubber Invalid Cushion
• Medline PluroGel Burn and Wound Dressing

How to use Prius Healthcare Duet Mattress System?

1. Remove the existing mattress from the bed frame.
2. Replace the standard mattress with the Duet LAL Alternating Anti-Decubitus mattress replacement system (position the mattress so that the air tube is at the foot of the bed).
3. Secure straps beneath the mattress to the bed frame.
4. Position the control unit on the foot board of the bed frame.
5. Attach the air tube connector to control units socket.
6. Verify that air hoses are not kinked under the mattress.
7. Attach cover to mattress.
8. Check CPR release to ensure it is set to the Close position.
9. Plug in the control unit and turn on the power switch located on the lower left corner of the control panel (the STANDBY LED will illuminate).
10. Press the Standby/Operate switch button on the control panel (Operate LED will illuminate and the control unit will be operational).

How to clean Prius Healthcare Duet Mattress System?

• The mattress should be cleaned on the bed weekly using a damp soft cloth and mild detergent.
• If top cover or base cover becomes grossly soiled, put on clean gloves, plastic gown and eye protection and, remove top and base covers.
• Dispose of in accordance to your facilities standard operating procedures for handling contaminated waste, replace with clean covers.

Prius Healthcare Duet Mattress System - Brochure