Harmar AL160 Profile Scooter Lift

Brand/Manufacturer: HARMAR MOBILITY
For Questions, Please Call...
Item # Desc Pkg Price
AL160 27.5" x 23" $59.40
$2,177.99
$1,980.00
Note: We would require Vehicle Information (Year, Make and Model) and Chair/Scooter information (Make and Model) to process your order. You can email us the information by clicking Here or you can use the Order Comments section while placing the order for this product.

Harmar Calculator: To learn which Harmar lifts are suitable with your vehicle and mobility device? Our Compatibility Calculator can help.


The Harmar AL160 Profile Scooter Lift is designed to transport power scooters with a wheelbase between 30” and 42” weighing up to 350 lbs. The AL160 Scooter Lift is a lightweight install on vehicles with a simple silhouette design. A single button push activates the automatic hold-down foot and secures the scooter automatically. Open platform design creates a streamlined silhouette that allows better visibility out of the rear-window.
The AL160 Profile Scooter is ideal for compact cars and for vehicles with a lower tongue weight rating. With a 27.5" x 23"open platform, Profile Scooter Lift can also transport larger power scooters and travel scooters of various sizes.


Harmar AL160 Profile Scooter Auto Lift Features

  • Ideal for travel or standard scooters with a lifting capacity of 350 lb (159 kg)
  • Lightweight - only 74 lb (36.5 kg)
  • Safe securement with -
    • Automatic hold down foot
    • Rear-wheel cradle
  • Fully powered and accommodates all 3-wheel scooters with wheelbase between 30"-42"
  • Fits virtually all 4-wheel scooters up to 42" wheelbase
  • One switch operation
  • Low maintenance
  • Works with Hitch sizes of class I, II, III, or V
  • License plate mount/holder included

Why choose Harmar Mobility AL160 Profile Scooter Lift?

  • High hauling capacity: Idea for almost all travel scooters and the larger sized scooters also Single switch operation: operates easily with a single switch, giving virtually everyone the ability to load and transport their scooter
  • Light installed weight: The installed weight of 74 lbs is light enough to allow the use of a Class I hitch
  • Convenient and easy transport: The weight capacity and automatic hold-down foot gives you the ability to secure and transport almost any scooter with a wheelbase of 30" to 42" with no modifications
  • Open platform design: When folded, the streamlined design allows better sightlines and visibility through rear window
  • Swing away: Swing-Away option allows an unoccupied outside lift to be easily pivoted away from the vehicle to gain clear access to the trunk, lift gate or tailgate. Always verify vehicle compatibility with a dealer
  • Battery Pack: If you are not comfortable with connecting the vehicle power harness directly to the battery of your vehicle, Harmar offers a stand-alone battery pack (AL205). The battery pack can be used when vehicles have a 12-volt battery capable of supplying power to a scooter lift.
Harmar AL160 Profile Scooter Lift

What to buy with Harmar Lifts


How to operate the Harmar Mobility AL160 Profile Vehicle Lift?

  1. Wiring the harness- Install the wiring harness to ensure there is the power to the scooter lift during the installation process which allows the motor to do the lifting process. If you do not use a wiring harness, you must use a battery pack
  2. Motor testing and troubleshooting- When troubleshooting, it is always ideal to test both the current and the voltage or run the motor with a good quality battery or power source
  3. Optimizing Hitch-height- Hitch height is the distance of the vehicle’s hitch receiver to the ground. Changing the height of the mobility lift helps you optimize the vehicle’s ground clearance. It ensures that the platform lies flat when it reaches the end of its travel
  4. Installation of Hitch Adaptor-
    • Attach the hitch adaptor to the hitch-post
    • Attach the hitch-post to the lift
    • Insert the hitch adaptor into the receiver on the vehicle’s hitch
    • Secure the adaptor according to the hitch class
  5. Swing Away or Hitch Post Installation-
    • Fasten the hitch adaptor to the vehicle’s hitch
    • Fasten the swing away or hitch post to the hitch adaptor
    • Position the open box behind the vehicle and connect the wiring harness together
    • Stand the lift up, use the switch to line up the hitch-post or swing away with the lift and fasten in place
    • Note: Only class 2 adaptors or greater can be used with swing-away
  6. Setting the hold-down foot height- It is very important to ensure the proper pressure to the scooter and for this hold-down foot must be adjusted in a correct way.

How to adjust Hold-Down Foot Height?

  • Run both nuts down onto the hold-down foot, so the foot will not catch onto the scooter’s deck. Make sure the platform is on the ground.
  • Drive the scooter onto the platform, from the driver’s side to the other side Drive until the rear wheels are positioned in the cradle bar assembly
  • Stop when the rear tires contact the ramps of the platform
  • Raise the platform until you hear the motor clutch, which indicates the top of travel
  • The hold-down foot should be above the scooter’s deck
  • Raise both nuts on the hold-down foot and allow the foot to rest on top of the scooter’s deck
  • While holding the stationary nut, run the bottom nut up to the hold-down arm and hand-tighten
  • Lift the hold-down arm up to eliminate slack and to ensure the arm is at its highest point
  • There should be pressure on the deck of the scooter and the bottom lock washer should be compressed from the bottom nut
  • Adjust the top nut 21/4" to 2 1/2" above the top of the hold-down arm. Once the measurement has been set, DO NOT adjust the top nut or the stationary nut
  • If the hold-down foot is set too loose, the foot may not have enough pressure to hold the scooter down. If too tight, the foot may cause damage to the scooter and/or lift.
    Note - Be sure that the frame of the scooter is in contact with the platform. The front-wheel may have to be rotated

  1. Wheel Cradle Adjustments: Add or replace a rear wheel cradle on the AL160 outside vehicle lift. Adjust the wheel cradle for the tire size.
    Note- Read the instructions and guidelines provided by the manufacturer properly. Do not attempt these procedures without the proper knowledge.

User manuals for Harmar Profile Scooter Lift - AL160


Warning WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Harmar AL160 Profile Scooter Lift Specifications

ParticularsSpecifications
Lifting Capacity350 lbs
Platform Size27.5" - 23"
Installed Weight74 lbs
Hitch Height5" - 18"
Hitch ClassI or greater
Accomodates3- or 4-Wheel Scooters up to 42" (106.7 cm) wheelbase
PoweredFully Powered
SecurementAutomatic Hold-Down Foot, Rear Wheel Cradle

Harmar AL160 Scooter Lift Warranty

3-Year Transferrable Warranty.

Customer Reviews

+=
Question

ItemName - now     10/23/2021

ItemQuestion
  Your question will show here once it will get approved.
Answer

UserName - now     10/23/2021

UserAnswer
  Your Answer will show here once it will get approved.

{{x.Heading}}

{{x.ShortDescription}} ...

What is HPFY’s return policy?

Customer satisfaction is our top priority. We stand behind our products. If the merchandise you received is defective or not what you expected it to be, and you wish to return the item, please submit a return request in the My Account section of our website, contact our Customer Service department at (866) 316-0162 / (203) 616-2850 or email us.

  1. Merchandise must be returned within 30 days of the receipt of your order. Returns are not accepted after 30 days.
  2. Items (including parts and accessories) must be returned in new, unused, and resalable condition in its original packaging.
  3. Before returning any product, the buyer must obtain a Return Authorization Number (RA#) from a customer service representative. With your RA# you will receive a prepaid return shipping label.
  4. Orders returned without obtaining an RA# will be entitled to receive only "In-Store Credit" that can be used towards future purchases.
  5. Return orders are subject to a 20% restocking fees.
  6. All custom orders and hygienic items are non-returnable. Refer to the “Non-Returnable Items” section for further details.
  7. Returns will be reviewed and inspected before issuing credit. Please allow 3 to 4 weeks for processing. The credit will be applied to your original method of payment.
  8. If the return is the result of a defective product or shipping error, we will refund the entire purchase amount and return shipping costs.

Which products are Non-Returnable?

Due to the hygienic nature of some items, they are non-returnable. The items listed below are non-returnable:

  1. All hygienic items.
  2. Opened personal care items.
  3. Anything opened, used, or tried on.
  4. All customized items.
  5. Besides these, items that have the “non-returnable” phrase on the website.

We reserve the right to make adjustments due to errors, changing market conditions, product discontinuation or typographical errors in advertisements. Images on the site may not always reflect the actual product. Footrests or leg-rests are not included with wheelchairs unless specified.

How do I receive a return authorization number?

You can submit a return request by logging into your account. You will receive the Return Authorization Number (RA#) details in the email within 2-3 business days.

  • Login to your account
  • Go to “order history”
  • Click on “return order”
  • Fill out the return form and Submit it

If you do not have an email address, we will make other accommodations for RA# Details. Write the RA# on your label affixed to your package prior to shipment.

How long does it take to receive a refund?

Please allow 3 to 4 weeks to process the returns. Once the item is received, and inspected, your refund will be processed and automatically applied to your credit card or original method of payment.

Is there any Restocking Fees?

  1. 20% restocking fees will be applied.
  2. Outbound shipping cost is non-refundable.
  3. For orders that qualified for free shipping, $8.99 will be deducted from the refund if the product is returned.

Other Lifts

{{'Buy ' + x.Name}}
{{x.Name}}
${{ x.OurPrice | currency: "" : 2}}
Please enter your and your friend's email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
Submit Cancel
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close