Graham-Field Lumex Three Position Geri-Chair Recliner

GF Lumex Three Position Recliner Chair Features

• Flex-o-Lator seat support system increases comfort by reducing the risk of bottoming out
• Position lock allows only the caregiver to secure the chair in any one of the three easily attained positions
• Recliner encourages natural relaxation and improved blood circulation
• Ergonomically designed seat and back with varied density foam construction provides correct support
• Articulating headrest quickly adjusts to maximize individual comfort requirements
• For safer, easier transport, the Lumex Three Position Medical Chair features two, four-inch swivel casters with wheel locks and four inches fixed front wheels
• Molded activity table can be fixed in position or left unsecured for easy exit from the recliner
• Durable welded steel epoxy coated frame is easy to clean and maintain
• Weight Bearing Capacity: 250lb

Lumex Chair Product Sheet
Lumex Geri Chair Operating Instructions

What to buy with Lumex Recliner Chair

Respironics InnoSpire Nebulizer Carrying Case

Graham-Field PVC Deluxe Hampers

Graham-Field PVC Linen Cart With Cover

 

How to use Lumex Recliner Chair?

How to clean Lumex Geri Chair?

• Check and clean casters
• Tighten nuts
• Check brakes on casters
• Check and clean lock recline mechanism
   

For Lumex Recliner upholstery maintenance and stain removal

• Ordinary Dirt: Wash with warm water and a mild soap or detergent
• Stubborn Dirt: Using a soft bristle brush, follow directions above
• Ground-in Dirt: Scrub with powdered cleanser or similar detergent
• Chewing Gum: Scrape carefully; remove with kerosene or naphtha
• Nail Polish and Remover: Blot immediately to prevent damage
• Ball Point Pen: Blot immediately with a white cloth dampened in water or mineral oil
• Paint, Shoe Polish, Heel Marks: Remove immediately! Use a white cloth dampened in kerosene, naphtha or turpentine. Do not use paint remover or liquid brush cleaners
• Tars, Asphalt, Creosote: Remove to prevent staining. Clean area with kerosene or naphtha
• Waxing and Refinishing: Improves wearability. Use any quality paste wax
• A diluted solution of 10% (or less) of bleach or Clorox may be used when cleaning this chair
• Caution: When using kerosene or naphtha, do so in a well-ventilated area and keep away from fire and flame.
   

Warning:

• Do not use near an open flame, as the chair may be a "combustion source"
• Caster wheels should be locked during occupant transfer
• Occupant weight should not exceed 250 lbs