Answer: Please follow these instructions , you will not face any problem then. Safety Precautions:
- Please make sure the Duet is fully opened, seat is down and the folding bar under seat is locked in the down position.
- Be sure that both knobs are fully tightened and are at equal heights. Test Duet for stability before applying full weight to hand grips.
- Test the loop locks before operating the Duet. When wheels are locked (see illustrations for locking and releasing locks below), lock bar on rear wheels should prevent wheels from turning. If the wheels turn while locked, please take unit back to dealer for adjustment. When locks are released, the wheels should turn freely.
- Always lock loop locks before sitting and do not use seat when unit is on an incline or uneven ground.
- Replace tires when significantly worn or damaged.
- Before entering or leaving the chair, engage the dual wheel locks against the tire on both rear wheels. Make sure the front casters are in the forward position before transferring into or out of the chair.
- Leaning forward while using the Duet as a transport chair with out proper assistance can cause tipping.
Loop Lock Operation:
Always engage and disengage wheel locks on both sides simultaneously.
- When standing in a stationary position the user must pull up on the loop lock handle to hold the rear wheels in place.
- To Temporarily Lock Wheels in Position
— Press down on both loop locks with palms until you hear a “click” that will tell you wheels are locked.
- To Release Wheel Locks
— Pull up on both loop locks with palms of hand to original position.
Note: You and your attendant should consult a qualified professional for the correct techniques on ramp negotiations.
HPFY Customer Care
Store answer
Helpful?
