Drive 3 Position Geri-Chair Recliner

Drive Medical 3-Position Recliner Features

• 3-positions: upright , deep recline, and elevated leg rest/footrest
• Retractable lock bar secures the medical chair in the desired position
• Self-adjusting suspension in the seat prevents bottoming out
• Side panels "pop-off" for easy cleaning and maintenance
• Large, blow-molded tray locks in 5 positions and can be stored on the side of the chair 5" casters (2 with locks) make it easy to move and secure the recliner
• Wide, comfortable armrests are angled to provide support in any reclined position
• The neutral-colored, sturdy steel frame is easy-to-clean and maintain
• Moisture barrier on seat prevents seepage
• Comfortable built-in headrest
• Foam and vinyl meet California Technical Bulletin 117
• Standard

User Manual of Drive 3 Position Geri-Chair Recliner

What to buy with Drive 3 Position Geri Chair Recliner

• Medline Double-Tread Slippers
• Anatomy Supply Bariatric Step Stool with Non-Slip Surface

How to operate Position Geri-Chair Recliner?

How to lock the Drive Medical Geri Chair?

1. Adjust the recliner to your preferred spot.
2. To remove the Lock bar from its stored location, pull out the Lock-Release Pull Button.
3. Rotate the recliner Lock Bar down until the notches over the Locking Pins are completely engaged.

How to unlock 3 Position Recliner Chair?

1. To disengage from the Locking Pins, raise the Lock Bar of the recliner.
2. Rotate the recliner Lock Bar all the way up until it is full against the seat back while pushing the Lock-Release Pull Button out.
3. To keep the recliner Lock Bar in the stored spot, release the Lock-Release Pull Button.

How to operate Driver Geri-Chair?

1. Underneath each arm, pull down, and hold the pull button until it goes into place. 
2. Then, on both ends, slide the lockout keys forward.
3. Pick up the table by the circular table arm and slightly slide the table into receiving tubing in front of each arm.
4. By holding the lock/lockout key forward, the table can be slid on and off.
5. One of five places on the table can be closed.Pull the pull button down and leave it in place when slipping the key backwards.
6. Continue to the other arm and backwards-move the key. The table tray can now be locked.