Detecto Portable Bariatric Wheelchair Scale

Features

• Detecto Portable Bariatric Wheelchair Scale include serial output to a printer or PC, battery or AC power, BMI calculation, yellow quick keys for basic weighing, and a bright LCD
• EMR-ready digital weight display and Body Mass Index calculation
• Low-angle integral ramps allow loading from either side of the scale
• It provides maximum patient security
• Skid-proof, soft and durable black rubber mat
• Advanced digital weight indicator
• Easy-to-read LCD display
• Large, easily-accessed weighing platform
• Barcode scanning capability which sends a 9-digit patient ID to the indicator for efficient EMR/EHR record keeping
• Hold/Release key to retain weight after leaving the scale
• Non-skid rubber mat for patient assurance and safety
• Operating Instructions

More Information

• Operating Instructions:
  - Scale Preparation:
  1. Install six (6) size batteries or if ordered with scale, plug the small connector end of the AC power adapter cord into the power jack located in the bottom right corner at the back of the indicator and then plug the AC power adapter into the proper electrical outlet.
  - Important: DO NOT connect an AC power adapter to the indicator if alkaline batteries are installed.
  2. Install the indicator on the scale bracket and then connect the load cell cable. 3. Place the scale on any hard, level, flat surface or low-cut carpet.
  4. The scale is now ready for operation.
• Basic Operation:
• - To Weigh:
  1. Press the ON/OFF key to turn the indicator on.
  2. Press the ZERO key to zero weight display. The ZERO and lb or kg annunciator will turn on to show that the scale is ready for use.
  3. Assist patient onto scale and read weight display.
  4. If a printer is connected to scale, press the (Down Arrow/Print) key to print a ticket.
  5. Assist patient off scale.
  - Zero Weight Display:
  1. If the indicator is not showing zero weight on the display, press the ZERO key.
  2. Weight display will return to zero. The ZERO, STABLE and lb or kg annunciators will turn on to show a stable, center-of-zero weight condition.
  - Metric Conversion:
  Press the UNITS key to toggle between pounds and kilograms. The lb or kg annunciator will turn on to show the weighing unit selected.