Vasyli Custom Blue Full Length Medium Density Insoles

Vasyli Medium Density Insole Features

• Custom-Fit Shoes - Vasyli Custom Red Insoles are designed for custom-fit shoes
• Boots - They are appropriate for men and women hiking boots
• Back, Knee, And Heel Pain - Vasyli Custom Red Insoles help relieve heel, knee, or back pain
• Athletic Use - Covered in a bonded fabric, they are suitable for athletic footwear
• Walking And Everyday Use - These High-Density Insoles are ideal for walking and everyday use
• Shoes For Kids - Vasyli High-Density Insoles can be used in shoes for kids
• Casual Shoes - Ideal for most men's shoes and broad-fitting, flat footwear of ladies
• Custom-Fit - Vasyli Custom Red Insoles are heat-moldable for a custom-fit

What to buy with Vasyli Custom Orthotics

• Pedifix Tulis Heel Cups
• Medline Comfort Plus Foot Cushion
• Rolyan Heel Positioner

How to use Vasyli Custom Insoles?

Step 1. Choose The Right Vasyli Insoles

• First, determine the density required by your patient. Vasyli insoles are available in three different densities - low (green), medium (blue), and high (red) to provide various levels of biomechanical control. Generally, a blue orthotic suffices.
• Second, choose a style of the insole that fits the footwear of your patient. Vasyli insoles come in a full-length style for athletic footwear and boots, and ¾ length for regular footwear.

Step 2. Fitting The Vasyli Custom Orthotics

1. First, check the shoes into which you will fit the orthotic. If the shoe is too badly worn, it must be replaced. If the shoe has some form of thick lining or arch cushion, remove it from the shoe.
2. Now pick a size of device that closely fits the contours of the foot. For greater accuracy, simply place the orthotic on the foot and see how it compares to the natural contours, making sure the distal edge of the orthotic finishes 5-10 mm behind the bisection of the 1st MPJ.
3. Fit the device to the extreme back of the shoe and ask the patient to walk around the room for a few steps. If there is no irritation, then allow the patient to wear the orthotic at home.
4. It may take a few days for the feet of the patient to become accustomed to the orthotic. If any discomfort occurs, have the patient remove them for one or two hours, then replace them and continue to remove and replace them until comfortable.
5. If the patient is still suffering from initial symptoms after a typical break-in period of 3 to 5 days, you may need to reassess the density of the orthotic and adjust your orthotic prescription. Excessive arch intolerance usually indicates a lack of rearfoot control and additional rearfoot posting may be required.

Step 3. Heat Mold The Vasyli Shoe Inserts

1. After determining the correct density, model, and size, check the patient's footwear and remove any existing innersoles that may interfere with fitting.
2. Place the orthotic (base up) on a heat-resistant surface. Apply the heat in a waving motion between the 2 Sorbon inserts. Do not concentrate the heat in one spot or along the arch profile as this may damage the product. When the raised lettering of the thermal indicator and the STC disappear, this indicates a molding temperature has been reached (approx. 194F / 90C).
3. With the patient sitting, place the heated orthotic into one shoe. For maximum comfort, ensure the patient is wearing a sock or stocking.
4. Place the foot into the shoe. Palpate and hold the foot in the neutral position, using the talonavicular technique. Ask the patient to stand with weight evenly distributed on both feet while maintaining the neutral position.
5. Palpate the shoe, molding it up into the arch area and around the heel cup. Press down on the forefoot to mold to the last of the shoe.
6. Ask the patient to sit, controlling the neutral position until fully seated. Remove the orthotic from the patient's shoe and allow it to cool for 5 minutes.
7. Repeat the process for the other foot.
8. Check for the correct prescription and add Vasyli orthotic additions or wedges, if necessary.

 

Frequently Asked Questions

Q1. For what conditions Vasyli Custom Blue Insoles are used?

These insoles are used to provide foot support, alignment, and pressure distribution for daily and athletic activities.

Q2. Who would benefit to wear blue, medium-density insoles?

They are made for those with average weight and general orthotic requirements.

Q3. Is it possible to modify these insoles?

Yes, for personalised and custom fit, it can be molded by heat gun.

Q4. Do these insoles cover the full foot?

Yes, they are full-length insoles that support the entire foot.

Q5. What materials are used in these insoles?

They are made from EVA foam with additional shock-absorbing materials.

Q6. Can these insoles help with pain?

They help relieve heel, knee, and back discomfort by improving alignment and support.