Teakworks4u ADA Wall Mount Shower Seat
Teakworks4u ADA Wall Mount Shower Seat

Teakworks4u ADA Wall Mount Shower Seat

Brand/Manufacturer: TEAKWORKS4U
Save
  • HyGiene Products
  • Non Returnable
  • Made in USA

Teakworks4u ADA Shower Seat is built on a heavy-duty steel frame with 1-3/8 inches wide teak battens for the seat. Frames, wall flanges, and guide brackets are made of heavy duty type 304 18-gauge stainless steel while the rounded edges on seat battens provide comfort and safety. Seat battens are spaced slightly apart to allow water to drain through.

Features of Teakworks4u Wall Mount Shower Seat

  • Edges are rounded and sanded for looks and safety
  • Weight capacity 300 pounds
  • Burmese teak
  • Stainless steel hardware included
  • Foldable
  • Titebond high-quality waterproof wood glue on products to ensure the best benches possible
  • Each bench uses marine grade stainless steel screws

Item #DescPkgPrice 
TBF-180160W Teakworks4u Shower Seat 18"L x 16"D x 14"H Each $435.99 $359.99
TBF-200160W Teakworks4u Shower Seat 20"L x 16"D x 14"H Each $472.99 $385.99
TBF-220160W Teakworks4u Shower Seat 22"L x 16"D x 14"H Each $511.99 $419.99
TBF-240160W Teakworks4u Shower Seat 24"L x 16"D x 14"H Each $535.99 $434.99
TBF-260160W Teakworks4u Shower Seat 26"L x 16"D x 14"H Each $555.99 $452.99
TBF-280160W Teakworks4u Shower Seat 28"L x 16"D x 14"H Each $555.99 $469.99
TBF-300160W Teakworks4u Shower Seat 30"L x 16"D x 14"H Each $585.99 $479.99
TBF-320160W Teakworks4u Shower Seat 32"L x 16"D x 14"H Each $601.99 $499.99
TBF-340160W Teakworks4u Shower Seat 34"L x 16"D x 14"H Each $621.99 $519.99
TBF-360160W Teakworks4u Shower Seat 36"L x 16"D x 14"H Each $642.99 $534.99

Teakworks4u Wall Mount Shower Seat Benefits

  • Teakworks4u ADA Compliant Burmese Teak Shower Bench should be mounted between 17" and 19" high, depending on particular needs
  • Stainless steel slide box makes it easy to raise and lower the seat
  • Seat remains in raised position until the user pulls it down
  • Built with accessibility in mind
  • The seat battens measure 1.375" wide and feature rounded edges for comfort
  • Radiused corners and edges plus a finely sanded finish complete this beautiful, yet functional seat

More Information

  • Burmese Teak:
    - Made of pure heartwood from mature Teak trees grown in the Indonesia/South East Asia region
    - Heartwood Teak provides an elegant piece with unique grain patterns and a beautiful rich color giving any area an immediate wow factor
    - The high silica content in teak makes it an ideal wood to use when a slip resistant surface is needed and the natural oil makes the wood resistant to mold and mildew

Cleaning Instructions for Teakworks4u Products

  • Cleaning can be done in your shower or outdoors if you want to move everything out there for more room
  • Do not use a powder washer 
  • For quick cleaning:
    -simply apply water with soft bristle brush in the shower area and lightly scrub the teak surface with a soft bristle brush. Then rinse teak surface with clean water and wipe dry.
  • For deep cleaning:
    -We recommend a commercial teak cleaner to remove any milddew or discolorations that have accumulated. These cleaners would not strip the wood of its natural oils and non-slip characterstics.  

Customer Reviews

Questions & Answers


 
 
question image
what kind off blocking do they recommend for installing bench
tom - 3/29/2017 7:08:47 PM
facebooktwittergplus
answer image
Shower seat must be installed using suitable fasteners and sufficient in-wall backing materials. ADA mounting height for lowered seat is 17" (432mm) to 19" (482mm). When properly installed, Teakworks4u shower seat has been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any shower seat, however, will be limited by the strength of its mounting surface and installation hardware. Teakworks4u recommends that shower seats be installed using 2" minimum thickness in wall solid wood blocking material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. Under no circumstances should any shower seat be mounted to drywall,sheetrock,plaster, fiberglass,acrylic or other similar "hollow" wall surfaces without appropriate wood or steel backing material.
Customer Care - 3/30/2017 3:03:28 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close