Sonic Boom Dual Alarm Clock with Super Shaker

Features

• Sonic Boom Dual Alarm Clock with Super Shaker has adjustable tone and volume control
• High and low dimmer control
• 113db extra-loud alarm and snooze button
• 9V battery backup, maintains time and alarm setting in the event of power failure (battery not included)
• Dual power capability, 110volts and 220 volts (requires optional transformer)
• Sound and vibration notification and extra loud pulsating audio alarm
• Dual time 12 or 24 hour
• Powerful 12V bed shaker included
• Large 1.8" bright green LED display
• User selectable snooze time 1 to 30 minutes
• User selectable alarm duration from 1 to 59 minutes

More Information

Operation Instructions:

• Important: Please read these instructions carefully before use and retain for future reference
• Setting the correct time:
  - Depress TIME SET button
  - As you depress the TIME button at the same time depressing the FAST or the SLOW minute/hour button to advance clock display until you have desired time
  - Lighted dot located in upper left corner of clock display indicates time is PM, no light indicates time is AM
• Setting the alarm time: 
  - To set alarm AL1 slide DUAL ALARM SETTING SWITCH to AL1 position
  - Depress ALARM SET/OFF button at the same time depressing FAST or the SLOW minute/hour button until you reach desired alarm setting
  - Make sure alarm time is correctly set for AM or PM
  - Once alarm AL1 has been set, slide the DUAL SETTING SWITCH to the AL2 position - Follow the same steps that were taken when setting alarm AL1
  - Once both AL1 and AL2 have been set, slide the DUAL SETTING SWITCH to the middle position AL1+AL2 for both alarms
  - You will see two dots on the right side of the LED display; AL1 and AL2 to show alarms have been enabled. Lighted dots indicate which alarm is set
• Alarm:
  - To enable the alarm function, slide the FUNCTION SWITCH up to the position that you desire to wake to, you can choose VIB for bed shaker, BUZZ for sound, and VIB/BUZZ for both
  NOTE: whichever function you choose to wake to, will be the same function for both alarms
• Snooze Operation:
  - SNOOZE button press after alarm has gone off
  - The alarm will re-set for an additional 9 minutes for extra sleep
  - You may repeat up to 54 minutes
  - When using SNOOZE (8) if alarm AL1 uses snooze, it will not affect alarm AL2
• Shutting Off Alarm:
  - Alarm can be shut off temporary for the day or permanently shut off
  - When alarm AL1 goes off, press the ALARM SET/OFF button to turn off for the day
  - Once both alarms go off and the ALARM SET/OFF button has been pressed, alarms will shut off for the day and come back on the next day at the same time if alarm settings have not changed
  - To shut the alarm off permanently, slide the FUNCTION SWITCH down to the OFF position. Alarm will not come on until FUNCTION SWITCH is set to  VIB/BUZZ VIB or BUZZ position
• Volume Control:
  - To adjust volume, rotate wheel located on the lower right bottom corner of the clock
• Tone Control:
  - To adjust TONE CONTROL turn the wheel on the top right corner of the clock to the desired tone sound
• Bed Shaker / Vibrator:
  - Attach the bed shaker jack to the back of clock at VIBRATOR INPUT  
  - To turn on vibrator slide FUNCTION SWITCH to VIB or VIB/BUZZ position
  - Place vibrator between mattress and box spring
• Battery Backup:
  - To use battery back up, install a 9-volt alkaline battery in back of clock located under the BACKUP BATTERY COMPARTMENT COVER