Skil-Care Lateral Stabilizer Armrest Bolster
Skil-Care Lateral Stabilizer Armrest Bolster

Skil-Care Lateral Stabilizer Armrest Bolster

Brand/Manufacturer: SKIL CARE CORP
Save

Skil-Care Lateral Stabilizer Armrest Bolster is a covered cylindrical foam cushion that can be mounted to most armrests to reduce unwanted lateral leaning. It is designed to reduce reliance on physical restraints. The wheelchair arm supports stabilize comfort residents. Cylindrical foam cushions may also be used on upright armrests as bolsters or on a vertical backrest bar.

Item #DescPkgPrice 
706110 Full Arm, 5" Diameter with Polyester Cover, Length: 16" Each $55.17 $42.44
706111 Full Arm, 5" Diameter with Sheepskin Cover, Length: 16" Each $63.65 $48.96
706112 Full Arm, 5" Diameter with Nylon Cover, Length: 16" Each $62.02 $47.71
706114 Half Arm, 5" Diameter with Polyester Cover, Length: 11" Each $53.22 $40.94
706115 Half Arm, 5" Diameter with Sheepskin Cover, Length: 11" Each $61.70 $47.46
706116 Half Arm, 5" Diameter with Nylon Cover, Length: 11" Each $54.85 $42.19
706120 Full Arm, 6" Diameter with Polyester Cover, Length: 16" Each $62.87 $48.36
706121 Full Arm, 6" Diameter with Sheepskin Cover, Length: 16" Each $66.31 $51.01
706122 Full Arm, 6" Diameter with Nylon Cover, Length: 16" Each $64.56 $49.66
706124 Half Arm, 6" Diameter with Polyester Cover, Length: 11" Each $54.85 $42.19
706125 Half Arm, 6" Diameter with Sheepskin Cover, Length: 11" Each $63.39 $48.76
706126 Half Arm, 6" Diameter with Nylon Cover, Length: 11" Each $61.70 $47.46

Features

  • Skil-Care Lateral Stabilizer Armrest Bolster reduces reliance on physical restraints
  • Covered in polyester, nylon, or synthetic sheepskin
  • Available for full-arm and half-arm wheelchairs in 5" or 6" diameters
  • Reduces lateral leaning for wheelchair users who lean to the left or right
  • User Manual
  • Note: Two bolsters will be required for patient stabilization.

More Information

  • Application:
    - Two bolster will be required for patient stabilization.
    - Select the proper size bolsters for your patient. 6-inch diameter for most patients; 5-inch diameter for heavy patients.
    - Remove covers and place the bolsters over the wheelchair armrests, slit side down
    - Replace covers-open side down-and secure hook-and loop closures.
  • Alternate Application:
    - For some patients, applying the bolsters to the vertical bar on the wheelchair backrest may provide more lateral support
    - If you wish to use the bolsters in this manner, apply them to the right. 
  • Cover Laundering or Cleaning:
    - Both the polyester and sheepskin covers may be laundered and dried at temperatures up to 180°F (82°C)
    - Bleaching to not recommended
    - To reduce the amount of lint that may accumulate in the hook-and-loop closures during laundering, we suggest that you wash and dry the covers nylon covers may be cleaned with a spray-type cleaner
  • Caution:
    - This device is not a restraint
    - It is designed to provide lateral posture support only
    - The determination as to the appropriateness of the Lateral Stabilzer Armrest Bolster for a specific patient is the responsibility of the facility and its professional and medical staff

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close