Salter Style 1600 Series Adult Clear Nasal Oxygen Cannula
Salter Style 1600 Series Adult Clear Nasal Oxygen Cannula

Salter Style 1600 Series Adult Clear Nasal Oxygen Cannula

Brand/Manufacturer: SALTER LABS (SA)
Save
Authorized Retailer Badge

Salter Style 1600 Series Adult Clear Nasal Oxygen Cannula is clear, lightweight cannula with unique, one piece anatomical design which eliminates the need for irritating flap, resulting in maximum patient comfort. The over-the-ear style headset provides secure positioning, allowing freedom of movement.

Item #DescPkgRewardPrice 
1600-7 With 7ft Long (2.13m) Tubing, 3 Channel Safety Each $0.01
$1.49
$0.97
1600-7-50 With 7ft Long (2.13m) Tubing, 3 Channel Safety 50/Pack $0.34
$55.13
$33.95
1606-0 Without Supply Tube Each $0.01
$2.33
$0.78
1606-0-50 Without Supply Tube 50/Pack $0.34
$49.99
$33.99

Salter 1600 Series Oxygen Cannula

  • Curved, tapered nasal prongs for improved anatomical fit for increased comfort
  • Over-the-ear style headset of Nasal Oxygen Cannula provides secure positioning
  • 3-channel safety tubing for uninterrupted flow of oxygen
  • Better comfort for long-term use
  • Curved tubing to fit upper lip
  • Eliminates flap or ridge which can cause irritation
  • Uninterrupted flow of oxygen
  • Salter Style 1600 has improved anatomical fit for increased comfort
  • Latex free
  • Also available (sold separately):
    - Salter E-Z Wrap Tube Cushions For Oxygen Cannula (Code 1016-0)

Customer Reviews

Questions & Answers


 
 
question image
is the 1606-0 a high flow cannula
Don - 12/30/2016 4:05:59 PM
facebooktwittergplus
answer image
Salter Style 1600 Series Adult Clear Nasal Oxygen Cannula is a high flow cannula.
Customer Care - 12/31/2016 6:49:40 AM
question image
How often are u supposed to change 50' oxygen tubing ?
Barnet Mc Adam - 10/4/2016 10:25:09 PM
facebooktwittergplus
answer image
Thank you for contacting customer care service. 
 These last forever. Use the same unit for repeated overnight uses. Just clean the cannula nose fitting with some peroxide or alcohol and its good to go.
Customer Care - 10/5/2016 1:00:08 AM
question image
1600 single output w/4ft tubing length      do you also have a 1053 with 4 ft tubing
Hubert Sharpe - 1/14/2016 12:05:47 AM
facebooktwittergplus
answer image
Thank you for reaching out to us. Unfortunately, right now we do not carry 1053 series 4 ft tubing cannula.
Customer Care - 1/14/2016 2:04:30 AM
question image
How long are the nasal tubes that goes in your nose long or short ?
mattie jones - 7/23/2015 3:49:16 PM
facebooktwittergplus
answer image
Thank you for reaching out to us. 

Length may vary from:
 .400 in. +- .025 in. 

This is not a molded product.
Customer Service - 7/30/2015 11:19:32 PM
question image
What size are the nasal tubes ?
mattie jones - 7/23/2015 3:37:03 PM
facebooktwittergplus
answer image
Thank you for reaching out to us. 

Length may vary from: 
 .400 in. +- .025 in. 

There are various measurements on the 1600 facepiece. The nares are 0.64 inches apart center to center. The prongs are approximately 0.116 inches in diameter ID. OD 0.155 at the tip. The prong length varies due to the dipping process and can be trimmed for patient comfort. 

This is not a molded product.
Customer Service - 8/6/2015 12:15:05 AM
question image
I never know which way the nasal tube goes in my nose should it go in up or down?
3893 Alberta Terrace Phia Pa - 3/30/2015 5:48:09 PM
facebooktwittergplus
answer image
Thank you for reaching out to us. The curve of the nasal prongs points down when placing in the nose. We recommend to please consult a physician/trained clinical expert or a healthcare professional to help you with the procedure.
Customer Care - 3/31/2015 11:38:31 PM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close