ROHO Mosaic Air Cushion

ROHO Mosaic Wheelchair Cushion Features

• Helps reduce fatigue by adding very little weight to the wheelchair or seating system
• Adjustable to shape and weight and changes in individuals position over time
• Hydrostatic distribution of load across the entire contact area
• Contouring has the outer left and right rows at a 3" height while the front middle section is 2.8" and the sacral bucket area is 2.6"
• Adds little weight to entire mobility system
• Cushion can be easily cleaned and disinfected
• Cover is machine washable and can be disinfected
• Made of polyvinyl chloride

When to use ROHO Cushion?

Recommended for seated individuals who may be:

• At risk for skin or soft tissue breakdown
• Have normal or impaired sensation
• Require accommodation of pelvic asymmetry

What to buy with ROHO Cushion

• ROHO Planar Solid Seat Insert
• Positioning Belt

How to use ROHO Mosaic Air Wheelchair Cushion?

1. Slide the hand pump nozzle over the inflation valve. Open the inflation valve (turn counterclockwise).
2. Inflate the cushion until it begins to arch.
3. Close the inflation valve (turn clockwise) and remove the hand pump.
4. Place the cushion inside the cover. (See COVER PLACEMENT.)
5. Place the cushion on the wheelchair with the cells right side up. The individual should sit in the wheelchair in their normal sitting position. Make sure that the cushion is centered underneath the individual. The inflation valve should be in the front, on the left side of the seated individual.
6. The cushion is most effective when there is 1/2 in. to 1 in. (1.5 cm to 2.5 cm) of air between the individual’s lowest bony prominence and the seating surface. To adjust the inflation level:
   • Slide your hand between the cushion and the individual. Slightly lift the individual’s leg and feel for their lowest bony prominence. Lower their leg to a sitting position.
   • While keeping your hand under the individual’s lowest bony prominence, open the inflation valve (turn counterclockwise). Release air until you can barely move your fingertips.
7. Close the inflation valve (turn clockwise).

 

How to transport and store Roho Mosaic Wheelchair Seat Cushion?

• Clean and disinfect the product before storing. Open the inflation valve.
• Deflate the product. Store the product in a container that protects the product from moisture, contaminants and damage.
• After storing, follow instructions to prepare the product for use.
• After transport, inspect the product to ensure it was not damaged.