Safepath EZ Edge Transition Rubber Threshold Ramp
Safepath EZ Edge Transition Rubber Threshold Ramp

Safepath EZ Edge Transition Rubber Threshold Ramp

Brand/Manufacturer: SAFEPATH PRODUCTS
  • Made in USA

Safepath EZEdge Transition Rubber Threshold Ramp is made of 100% recycled rubber which helps the user to effortlessly transit from one height to another. It is designed for immediate and easily installation on concrete, asphalt, wood, tile, VCT and marble. It is most often used for door thresholds, sliding glass doors, entry ways, or any other transitions that impede a free path of travel. Simply choose the model closest to the height and the necessary width required.

Safepath EZEdge Threshold Ramp Highlights

  • Easily cut to fit inside door jambs, molding, etc 
  • Easy solution to solve threshold barriers 
  • Solid, 100% recycled rubber 
  • Ensures instant accessibility 
  • 3-sided approach 
  • Custom sizes available 
  • Made in the USA 
  • ADA Compliant

Shipping Charges Applicable

Item #DescPkgRewardPrice 
MRAEZ0010 3.25"D x 41.5"W x 0.5"H Each $1.60
MRAEZ0040 3.25"D x 74.25"W x 0.5"H Each $3.00
MRAEZ0050 6.5"D x 41.5"W x 0.75"H Each $1.90
MRAEZ0080 6.5"D x 74.25"W x 0.75"H Each $3.75
MRAEZ0110 8"D x 41.5"W x 0.88"H Each $2.15
MRAEZ0140 8"D x 74.25"W x 0.88"H Each $3.70
MRAEZ1150 9.75"D x 46"W x 1"H Each $3.50
MRAEZ1180 9.75"D x 82"W x 1"H Each $6.50
MRAEZ1110 14"D x 46"W x 1.25"H Each $3.70
MRAEZ1140 14"D x 82"W x 1.25"H Each $6.50
MRAEZ1310 17.75"D x 45.75"W x 1.5"H Each $5.80
MRAEZ1340 17.75"D x 81.25"W x 1.5"H Each $10.00
MRAEZ1510 22"D x 45.75"W x 1.75"H Each $6.10
MRAEZ1540 22"D x 81.25"W x 1.75"H Each $10.00
MRAEZ2100 25.75"D x 46"W x 2"H Each $7.80
MRAEZ2130 25.75"D x 82"W x 2"H Each $15.00
MRAEZ2150 29.25"D x 46"W x 2.25"H Each $8.50
MRAEZ2160 29.25"D x 82"W x 2.25"H Each $16.00
MRAEZ2170 34.25"D x 46"W x 2.5"H Each $10.00
MRAEZ2180 34.25"D x 82"W x 2.5"H Each $18.50
MRAEZ2190 34.25"D x 46"W x 2.75"H Each $10.50
MRAEZ2195 34.25"D x 82"W x 2.75"H Each $20.00

EZ Edge Rubber Threshold Ramp Features

  • Made from durable, all-weather, 100% recycled rubber
  • Installation is quick and easy, significantly reducing labor costs
  • Most often used for door thresholds, sliding glass doors, entry ways, or any path of travel with a vertical barrier
  • Superior slip resistance
  • Unlimited weight capacity
  • Easily roll a wheelchair or scooter over thresholds and through doorways
  • Versatile rubber design accommodates a step or door jamb from 1/2" to 2-3/4" high
  • Easily cut to fit into and around moldings
  • Ideal for wheelchair access to homes or businesses
  • Used for interior and exterior applications
  • Durable and maintenance free
  • Easily washed with soap and water
  • UV stable
  • Only ramp to exceed ADA requirements in the market
  • Click Here for User Manual
  • Click Here for Installation Instructions
  • Click Here for MSDS Sheet

How to Install EZ Edge Threshold Ramp?

  1. It is imperative that your substrate is clean and free of debris before beginning installation. A clean, dry substrate ensures maximum adhesion.
  2. Dry fit the product by placing it flush against the threshold.
  3. Use painter tape to outline the ramp.

  4. EZ Edge Threshold Ramp Installation

  5. Remove ramp.
  6. Generously apply adhesive to the substrate. For best results, apply with a caulking gun, then use a notched cement/grout hand trowel to spread evenly.

  7. EZ Edge Threshold Ramp Installation

  8. Replace ramp onto the adhesive surface.
  9. Apply pressure to ramp evenly. Some glue may leak out onto tape.
  10. After ramp is in place with adhesive, carefully remove painter tape.
  11. Excess adhesive can be cleaned with the substrate or product by applying acetone or paint thinner.
  • Warning:
    - Do not use a power circular saw to cut ramp
    - Use of any electrical, battery, or pneumatic powered circular saw may result in serious injury due to unexpected binding, grabbing, or pinching of ramp material


Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
question image
What type of adhesive is used to hold down?
Craig0 - 7/28/2017 7:18:45 PM
answer image
The manufacturer strongly recommends SikaFlex 1a brand adhesive applied via a caulking gun, for best results.
Customer Care - 7/29/2017 8:35:50 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using