Mangar Leglifter

Mangar Leg Lifter Features

Easy to use Leg Lifter

• Fits most beds including profiling beds
• Straight forward to fit or remove, and requires no permanent installation
• Attaches to the bed underneath the mattress
• One airline connects the Leglifter to the Airflo Compressor and inflation is activated by pushing one button

Leg Lifter for bed is safe to use

• Raises, lifts and transfers legs into the bed
• Leg break on profiling beds can still be used once leglifter is fitted

Mangar Leg lifter is simple to maintain

• For a routine clean, sponge clean with a detergent solution and dry thoroughly
• The covers can be machine washed
• Spare covers can be purchased

Leg Lifter improves well-being

• Minimises moving and handling so reducing the 
• Mangar Leglifter fits discreetly against the side of the bed
• No permanent installation required

What to buy with Mangar Electric Leg Lifter For Beds

• Mangar Raiser Lifting Cushion 
• Mangar AirFlo 12 Air Compressor 
• Mangar Handy Pillow Lift

How to use Mangar Bed Leg Lifter?

• Sit on the bed at your normal entry point and as far across the bed as possible. Angle your legs towards the foot of the bed as far as is comfortable (fig. 6). If possible, use one arm for support as illustrated, until you are ready to lie down. Some clients prefer to use a bed lever for this purpose.
• To lift your legs onto the bed, press ‘up’ on the hand control. Release the ‘up’ button to stop at the half-way stage and/or any convenient point and adjust your position to improve the angle of your leg.
• Fully raise the Leglifter, allowing your legs to slide along the cushion and gently drop onto the bed.
• Deflate the Leglifter by holding the ‘down’ button for a few seconds; release the button and the Leglifter will carry on deflating.

Instructions Manual of Mangar Inflatable Leg Lifter
 

How to clean Mangar Leglifter?

• Routine cleaning
  • Remove the cover and inflate the Leglifter.
  • Sponge clean with a non abrasive proprietary liquid cleaner or disinfectant and dry thoroughly.
  • Do not dry using hot air.
  • The cover can be machine washed up to 40°C; low heat tumble dried and medium heat ironed.
  • Do not dry clean or use bleach.

• Disinfection
  • The cover should be removed and the Leglifter fully inflated.
  • The Leglifter should be precleaned by washing with detergent and water and then disinfected using a 1:10 solution of household liquid bleach and water (1 part bleach to 10 parts cold water).
  • Leave the solution on the HPL for approximately 10 minutes before thoroughly rinsing off with clean cold water.
  • Do not dry using hot air.

Mangar USA Leg Lifter Storage

• Ensure that the Leglifter is thoroughly dry before storing.
• Store deflated

Mangar LegLifter Maintenance

• Periodically check the air hose for signs of damage or wear.
• Periodically check the fitting straps for signs of damage or wear.
• Regularly launder the cover and allow to thoroughly dry before refitting.