Karman Healthcare LT-980 Ultra Lightweight K4 Manual Wheelchair

Karman Healthcare LT-980 Manual Wheelchair Features

• Ultra-light weight aluminum frame
• Weighs only 24lbs (without riggings/footrest)
• Folding backrest for easy travel or storage
• Fixed armrests with molded arm pads
• Composite side guards
• Swing-away/detachable footrest
• Height adjustable footplate
• Adjustable push to lock wheel brakes 6” x 1“
• Flat free front polyurethane casters 22” x 1-3/8”
• Spoke wheels with high profile/polyurethane tires
• Easy-Grip push-rims
• Carry pocket on backrest
• Easy to clean Nylon upholstery
• Seat height adjustability 

What to buy with LT-980 Ultra Lightweight Wheelchair

• Drive Universal Cup Holder
• CareActive Wheelchair Rain Poncho
• Complete Medical Eggcrate Wheelchair Cushion
• Sammons Preston Premier Wheelchair Arm Tray

​

How to use the LT-980 Lightweight Manual Wheelchair from Karman Healthcare

• Opening Wheelchair: Tilt the wheelchair toward you far enough to take the weight off the opposite wheel. Push down on the seat rail (the one closer to you) until the wheelchair is completely opened. Make sure seat rail tubes are snapped into frame saddles. (WARNING: Do not place your fingers between the frame rail and seat sling when opening or folding the wheelchair)
• Folding Wheelchair: Before folding the wheelchair, flip up the footplates to a vertical position. Grasp the seat sling (in the center) and lift sharply until the wheelchair is folded.(WARNING: Never lift the wheelchair by the swing-away footrests or elevating legrests or armrests. These parts are detachable. Lifting the wheelchair by them may cause damage to the chair or injury to the user)
• Install/Remove Swing-away Footrests: Place swing-away pivot saddle into the receiver on front frame tube. Rotate the footrest inward until it locks into place on locking bolt. To remove footrest, push release latch outward the frame, rotate footrest outward and lift. 
• Install/Remove Elevating Legrests: (Optional) To Install or remove elevating legrests see instruction for swing-away footrest above.
• Footplates Height Adjust: To adjust footrest footplate or footrest height using a wrench to loosen the bolt in the bottom of the footrest, inward/outward rotation, reposition footplate and retighten bolt.
• Quick Release Wheels: To adjust remove wheels, push the center button and with an inward / outward motion, detach the wheels including axle to slide out of the frame releasing the wheel from the frame. 
• Anti-Tippers: Anti-tipper can be used to stabilize over uneven surfaces, kurbs, dips, or any obstacles and add safety to prevent the instability of tipping over. The range can be adjusted to ensure a optimum length.

Click Here for User Manual