Hollister Horizontal Tube Attachment Device

Horizontal Drain Tube Catheter Securement Device Features

• Secures drains or tubes (5–40 Fr) parallel to patient’s skin
• Not made with natural rubber latex
• Eliminates the need for suturing certain tubes to the skin
• Protects the skin surrounding the tube site
• Minimizes the tube movement
• Microporous Tape Border
• This catheter securement device features adjustable Clamp
• Self-adhesive attachment device
• May be left in place up to five days
• FlexWear adhesive barrier helps secure device to the skin

What to buy with Hollister Horizontal Tube Attachment Device?

• Hollister Adapt Universal Adhesive Remover Wipes
• Hollister Extension Tubing with Connector
• Hollister Urostomy Drain Tube Adapter

How to use Hollister Latex-Free Horizontal Catheter Attachment Device?

• Clean and dry the skin where the product will be applied
• Do not use any lotions or emollients as the residue will interfere with the adhesion of the barrier
• Using sterile technique (where applicable), cut a cross slit in the barrier perpendicular to the starter slit. The larger the diameter of the drain/tube, the farther away from the drain/tube holder the cross slit should be made. If needed, trim the barrier for a closer fit around the tube
• Peel the release paper from the skin barrier on the underside of the attachment device. Do not remove the release paper from the tape border. 
• Feed the drain/tube through the starter slit to cross the slit. Position the device so that the drain/tube holder is below the tube exit site
• Press the barrier to the skin firmly, but gently, and smooth it to remove all wrinkles to ensure complete adhesion. Remove the release paper from the tape border and press tape to skin
• Place the drain/tube on the top of the serrated strap, making sure the drain/tube is not kinked. Bring the strap over the tube and push it into the strap insertion hole in the drain/tube holder.
• Pull the strap while pushing it from the other side until it fits snugly around the drain/tube. Be careful not to dislodge the attachment device during this step. The strap should squeeze the drain/tube slightly for maximum security.

• Release the drain/tube from the tube holder by pushing the serrated strap backward while squeezing the sides of the latch. Pull the strap all the way back through the sides of the latch
• Pull the strap all the way back through the latch
• Starting at the cross slit opening, gently peel the barrier and tape from around the drain/tube and from the patient's skin
• Hold the tube with one hand and remove the attachment device

• Do not pull the strap too tightly as the pressure may cause occlusion in the drain/tube when using the horizontal drain/tube attachment device be sure to follow the current standard clinical procedure for the placement, monitoring, and removal or percutaneous tubes