Harmar AL301XL Scooter And Power Chair Fusion Lift

Harmar AL301XL Scooter and Power Chair Fusion Lift is a fully powered outside lift with a unique design that makes it an ideal solution to safely and securely transport the largest power chairs and scooters. Harmar's Stars-N-Stripes aluminum deck design offers maximum strength and durability. With its extra-large deck and optional adjustable cradles, this lift is by far the biggest and most capable outside lift on the market. An Outside Auto Lift is attached to the vehicle by means of a hitch and consists of an actuator and platform which secures and carries the mobility device on the back of the vehicle.

AL301XL Vehicle Lift Benefits

• Easy one switch operation
• Front and rear wheel cradles
• 4 Self-tensioning Q-Straint retractors
• Accommodates - Larger power wheelchairs and larger scooters
• Fully powered
• Made in USA

What does Harmar AL301XL Outside Lift include?

• Includes AL107 hitch post
• AL123HD class III heavy duty
• Hitch adapter
• Manual crank backup and license plate mount

Features of Harmar AL301XL Scooter And Power Chair Fusion Lift

• This outside lift carries larger power scooters or power chairs with no modifications required
• Extra-large 36" x 39" aluminum deck/adjustable cradles extend up to 53" Swing-Away option available
• Class III hitch adapter standard (AL123X); drop adapter upgrades available.
• Weight Capacity: 350 lbs
• Folds automatically when not in use
• No chair modifications required
• Ideal choice to gain 8.5" extra width or meet the need for lengths longer than 46"
• AL301XL larger deck handles wider or longer scooters and power chairs

What to buy with Harmar Fusion Lift

• Harmar Vehicle Wiring Harness
• Harmar AL205 Battery Pack
• Harmar Single Fold Ramp

How to maintain Harmar AL301XL Fusion Power Chair and Scooter Lift?

• Oil pivot points on all moving parts every six (6) months
• Grease the inside vertical square tube once a year (every six [6] months under hard conditions or extreme weather). Lower the platform to the ground and clean the tube with mineral spirits, or a good solvent. When cleaning, grease the square vertical tube shaft with high-grade water-resistant grease such as boat trailer wheel bearing grease.
• Check for paint chips and touch up bare metal. Use a good black enamel or lacquer to inhibit rust. You may need to do this more frequently if your lift is subject to salt air or road salt in the winter.

Harmar Mobility AL301XL Fusion Lift Safety Precautions

• Beware of pinch points. These are areas of moving parts that can catch extremities or clothing. Do not place fingers, extremities, clothing or jewelry near pinch points
• Keep hands, feet and objects away from the platform as it lowers. Keep the chair tires properly inflated. Improper inflation will change how the chair fits and secures on the platform and will change the securement pressure.
• Secure the chair firmly before driving. Doublecheck to confirm that the chair is secured properly before you transport it.
• Inspect the lift condition often. If ANY parts are worn or damaged, Do not use the lift. Immediately contact the dealer that you purchased the lift from to schedule repairs.
• Do not enter steep driveways straight on. Enter and leave at an angle to the street so that the lift does not drag on the ground.
• Do not move the vehicle with the platform down. If you move the vehicle with the platform in the DOWN position, you will damage the lift.
• Hand-wash or use a touch-less automatic car wash only on the lift. To prevent lift damage Do not use automatic wash systems.

How to use Harmar AL301XL?

How to lower the lift AL301XL Fusion Lift?

1. Insert the key and turn the switch to the ON position
2. Press DOWN on the toggle switch. The platform will unfold, as the lift is lowered
3. Continue to lower the platform until it reaches the ground and becomes level

Positioning the Mobility Device onto the Harmar Lift Platform

1. Position your mobility device slowly
2. Stop positioning when the drive wheels fall between the wheel cradles on the side or center, depending on the lift and chair model.
   Note - Positioning the mobility device properly on the platform is critical to ensuring the device is properly locked onto the lift. Always verify that the wheels are captured by wheel cradles. Please consult your dealer on the specifics of your application.

Securing The Mobility Device

Depending on your lift model and the type of securement device it uses, you may wish to raise the platform halfway by using the UP-toggle switch. If you raise the platform, you won’t have to bend over while you attach straps or flip the chair’s armrest out of the way of the hold-down arm.

Raising The Harmar Mobility AL301XL Extra Large Fusion Lift

1. When the mobility device is secure, use the UP toggle switch to continue raising the lift
2. Stop raising the lift when it reaches the top of travel and when you hear the clicking or ratcheting sound
3. Remove the key

Unloading The Chair

1. Insert the key and turn the switch to the ON position
2. Press DOWN on the toggle switch to lower the lift
3. Release/move the hold-down devices that are not automatic
   Note - Make sure any automatic securement devices are fully disengaged prior to removing the chair from the platform
4. Guide the chair off the platform carefully

Harmar AL301XL User Manuals

• Harmar AL301XL Scooter And Power Chair Fusion Lift Sell Sheet
• Harmar AL301XL Fusion Lift User Manual
• Harmar AL301XL Fusion Outside Lift Installation Manual