Benefits of Harmar Outside Lift
- 4 tie-downs plus wheel cradle securement
- Class II hitch adapter standard; Class I, II, III hitch adapter upgrades available
- 23.5" x 33" platform, adjustable cradle up to 40"
- Manual crank backup and license plate mount included
- Powered lift with manual-folding
- For travel 3 or 4 wheel scooters
- Swing-Away option available
- Works with Class I, Class II or Class III hitches
- Must be hardwired to a car battery
- No scooter or chair modifications required
- Compact solution for travel scooters and chairs
- Power lift and manual fold
- License plate mount included
- 135-pound lifting capacity
- Weights 70 pounds installed
What to Buy with Harmar Power Micro Scooter Lift?
Maintenance and Care Of Outside Lift
This Outside Lift is designed to be as trouble free as possible; however, some basic maintenance will ensure that it continues to offer reliable use for years to come.
- Oil pivot points on all moving parts every 30 days
- Re-grease the inside vertical square tube every 30 days in winter or in dirty or dusty conditions
- Just lower the platform to the ground and clean the tube with mineral spirits, WD-40, or a good solvent
- When clean, grease the square vertical tube shaft with high grade water-resistant grease such as boat trailer wheel bearing grease
- Check for paint chips and touch up bare metal
- Use a good gloss black enamel or lacquer to inhibit rust
- You may need to do this more frequently if your lift is subject to salt air or road salt in the winter.
Note: To complete this order we would also require your vehicle information (vehicles year, make, model) and mobility equipment information (wheelchair/power chair/scooter manufacturer, model etc.) We will call you for the same.
Harmar AL010 Outside Lift Specifications
Particulars | Dimensions |
Lifting Capacity | 135lb |
Installed Weight | 71lb |
Hitch Height (range) | 5" to 18" |
Hitch Class | I, II, or III |
Aluminum deck size | 33" x 23.5" |
Harmar Outside Lift Warranty
3 year transferable warranty 
