Graham-Field Lumex Easy Battery-Powered Sit-to-Stand Lift

Features of Graham-Field Lumex Easy Battery-Powered Sit-to-Stand Lift

• Intuitive foot pedal leg opening mechanism frees up hands
• Maximum weight capacity: 400lbs
• This power lift has ergonomically designed hand pendant with pendant hook
• Warning beep and visual indicator on control box for low battery charge
• Accessory storage bag included for slings and charger
• Quick release removable foot platform for gait training
• 24V DC motor allows quiet, smooth operation
• Lumex Battery-Powered Sit-to-Stand Lift User Manual

What to buy with Patient Power Lift

• Graham Field FLATMAT Bedside Fall Mat
• Graham-Field Lumex Everyday Dual Release Walkers
• Graham-Field Lumex Tri-Step Cane

How to assemble Lumex Easy Lift Sit-to-Stand Lift?

1. Remove the nuts and bolts from top and bottom of mast
2. With one hand on the mast and another on the boom, pull the mast to an upright position
3. Reinstall the bolts in the holes at bottom of mast and hand tighten them
4. Attach boom to mast and hand tighten bolt and nut
5. Attach the L-shaped arms to the back of the knee pad
6. Attach knee pad assembly to the mast
7. Place the control box in the bracket
8. Insert the actuator plug into the control box
9. Insert the pendant plug into the control box
10. Tighten all nuts
    Warning: Before using Patient Lift, ensure that lift is assembled as described, that all attaching hardware is securely tightened, and that all lift components are secure

How to care for Graham Field LF2020 Power Lift?

• Before Each Use of Lift: Before each use of the patient lift, ensure that:
  • All nuts and bolts are tight
  • The lift moves freely (with caster brakes off)
  • Rear caster brakes operate properly
  • Base adjustment mechanism operates easily
  • All necessary items (i.e. slings, wheelchairs, etc.) are accessible and ready for use
  • Battery capacity is adequate
• Lubrication: When the lift is serviced, and every month thereafter, place a drop of lubricant on the following points:
  • The point where mast and boom connect
  • Caster axles
  • The point where actuator and boom connect
• Cleaning: Regular cleaning is recommended every three months; clean the lift more often as needed. A soft cloth, dampened with water and a mild NON-ABRASIVE detergent (household cleaner, soapy water, or hospital grade disinfectant) is all that is needed to clean your patient lift. Automobile wax or furniture polish will help maintain the finish over a long period of time.
  
  Note: Do not wash patient lift under water pressure or steam clean
   
• Care of Slings: Lumex slings are washable at 150°F or less. The slings can be air dried or dried by using a dryer on LOW heat.
  
  Note: Do not bleach slings!
   

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov