Graham-Field Everest and Jennings Traveler L4 Manual Folding Wheelchair

Why choose Graham-Field Traveler L4 Manual Wheelchair?

• Graham-Field Everest and Jennings Traveler L4 Manual Wheelchair weighs less than 34 lb without front rigging (footrest)
• Hammertone paint provides a long lasting and durable finish
• Carbon steel frame provides strength and durability
• Black nylon upholstery with standard chart pocket on back
• Non-marking polyurethane tires
• Industry compatible front rigging (footrest) with heel loops standard on swingaway footrests
• Maximum weight capacity 250 lb (300 lb on models with 18" seat depth) evenly distributed
• Seat to Floor Height: 18" or 20"
• Back Height: 16.5" or 18.5"
• Overall Height: 36"
• Folded Width: 11.5"

Graham-Field Traveler L4 Wheelchair Parts

Traveler L4 Wheelchair Features

What to buy with Everest and Jennings Traveler L4 Wheelchair

• Invacare Adductors
• Invacare Ergonomic Arm Troughs
• Karman Healthcare T-2700 Transport Wheelchair

How to use Graham-Field Everest and Jennings Traveler L4 Lightweight Wheelchair?

Unfolding Traveler L4 Manual Wheelchair

1. Engage wheel locks on both sides.
2. Use both hands to push down with even pressure on seat tubes and seat upholstery on insides of wheelchair, as shown at above left, until the seat rails are fully seated, as shown at above right. Do not place any fingers or parts of your hand under the seat rails.
3. Attach footrests or legrests to lightweight wheelchair.
4. Reinstall seat cushion, if so equipped.

Warning: Ensure seat, arms, and footrests or legrests are locked in place before occupying or operating wheelchair. When unfolding the wheelchair, ensure that seat is completely open and seat rail is resting on seat rail & arm cradles. If not, wheelchair is unsafe to occupy.

Folding Traveler L4 Lightweight Wheelchair

1. Detach footrests or legrests from wheelchair.
2. Remove seat cushion, if so equipped.
3. Grab the seat upholstery at center front and rear with both hands, pull sharply, and lift up as shown above.
4. If necessary, fold the excess seat upholstery over the arm.
5. To fold wheelchair completely, tip it sideways so wheel won’t drag and press sides together as shown at above right.

Transfer Activities:

• Always ensure that the wheelchair is on a stable, level surface and engage wheel locks before transfer
• Do not step on the footplates; this could cause the wheelchair to tip. Fold them up, and either detach them or swing them aside
• There is a critical moment when there is little or no seat platform beneath you. Take every precaution to reduce this unsupported distance before you attempt the transfer

Everest & Jennings Traveler L4 Wheelchair User Manual
Everest & Jennings Traveler L4 Lightweight Wheelchair Installation Instructions
Graham-Field Traveler L4 Wheelchair Parts Description


Warnings:

• When wheelchair is in use, anti-tippers must be installed in the downward position
• Indicates a potential hazard situation or unsafe practice that, if not avoided, could result in death or serious personal injury
• Indicates a potential hazard situation or unsafe practice that, if not avoided, could result in product or property damage
• Do not operate this wheelchair on streets or roadways
• Do not operate this wheelchair on hilly or rough terrain, sand, wet or icy surfaces, or surfaces with impaired traction. Ensure that pathway is clear of all obstacles
• Do not turn wheelchair while going downhill, as wheelchair could tip over
• This wheelchair does not offer seating or occupant restraint equivalent to the seat provided in a motor vehicle! To increase your safety while traveling in a motor vehicle, always transfer to the vehicle seat and use the restraint provided by the vehicle manufacturer
• Do not tie down or attach anything to the wheels. This could cause tipping and possibly result in injury or damage to the wheelchair
• Doing a wheelie (tilting the wheelchair backward until it reaches its balance point) is dangerous and could result in personal injury to the user
• Do not place your hands between seat rail and side panel
• Ensure that wheelchair is on a stable, level surface and engage wheel locks before and during transfer
• Wheel locks are not brakes. Do not use the wheel locks to slow down your wheelchair, or while the wheelchair is moving. Wheel locks are only intended to keep the wheelchair in place when it is at a complete stop