July 4th Sale! 10% Off | Code: HPJUINP
10% Off Women's Health and Rehab & Therapy, Code: ATBF10, Exclusions Apply
  866-316-0162 Toll-Free

Drive Nitro Duet Rollator and Transport Chair

Authorized Retailer Badge
Nitro Duet Transport Chair Drive Nitro Duet Rollator and Transport Chair Nitro Duet Transport Chair and Rollator

This product is on backorder and will be available to purchase once it is back in stock.


Item# Description Pkg reward$ Price Blank
Item #: RTL10266DT
Drive Nitro Duet Rollator

Drive Nitro Duet Rollator and a Transport Chair features a combination of a rollator and transport chair into one unit. It can ambulate independently or be pushed safely by a caregiver. This Nitro Duet Rollator can be adjusted tool-free in two-position as the contoured backrest is reversible, depending on whether users are using the Nitro Duet as a rollator or transport chair.

Benefits of Nitro Dual Function Transport Wheelchair and Rollator

  • Tool-free two-position contoured backrest 
  • Cross brace design
  • Periodic visual inspection
  • Weight Capacity 300 lbs.

Drive Nitro Duet Rollator Features

  • Back support height easily adjusts with tool-free buttons
  • Caster fork design and large 10 Inch front casters enhanceturning radius and rolling comfort
  • Cross-brace design allows for side-to-side folding and added stability 
  • Brake cables routed inside the frame add safety and convenience

Drive Nitro Duet Rollator Manual

What to buy with Drive Nitro Dual Function Rollator

How to use Drive Nitro Duet Rollator and Transport Chair?

Instructions for using Nitro Duet as a Rollator

  • Press and hold the red button on the footrest and move the footrest to the vertical position. Flip the backrest forward.
  • Squeeze the armrest triggers to move them to the down position

Instructions for using Nitro Duet as a Transport Chair

  • Flip the backrest backward and the armrests up
  • Press and hold the red button on the footrest and move the footrest down
  • Repeat for the other side

Unfolding The Nitro Duet

  • Position the Nitro Duet on its wheels
  • Open the Nitro Duet
  • Press the tubes attached to the seat downwards until they lock into position

Height Adjustment of Drive Nitro Duet

  • Press and hold down the red release buttons
  • Simultaneously move the handgrip up or down
  • When the desired height is reached, let go of the red release buttons and the handgrip will automatically lock into the next possible height position

Braking/Locking of Drive Nitro Duet Rollator

  • Pull both brake levers upwards to apply the brakes while the Rollator is moving. Always brake slowly and steady.
  • Press both brake levers down to apply the locks while the Nitro Rollator is stationary. Pull up the brake levers and release to release the locks.
  • The effect of the brakes can be affected by abrasion of the wheel

Adjustment of Brakes in Nitro Duet

  • The brake system fitted on this rollator complies with the manufacturer’s quality standards
  • The brake system has been preset (adjusted) to the best performance settings
  • To better suit you personally, please follow the instructions set out below
  • You may need to adjust the brake systems from time to time as they will wear out with normal use
  • To adjust the braking strength, adjust the brake by pressing the screw housing downwards and then turn left or right

Safety Instructions for Drive Nitro Duet Transport Chair and Rollator

  • Make sure the Nitro Duet is fully opened and the seat is down
  • Be sure the handgrips are at equal height
  • Test the brakes before operating the Nitro Duet. When wheels are locked (see illustrations for locking and releasing locks previously in this manual), lock bar on rear wheels should prevent wheels from rotating. If the wheels rotate while locked, please take unit back to dealer for adjustment. When the brakes are released, the wheels should rotate freely.
  • Always lock the brakes before sitting and do not use seat when unit is on an incline or uneven ground
  • Replace wheels when significantly worn or damaged
  • Before entering or leaving the chair, engage the dual wheel locks on both rear wheels. Make sure the front casters are in the forward position before transferring into or out of the chair.
  • Leaning forward while using the Nitro Duet as a transport chair without proper assistance can cause tipping
  • Do not expose the product to temperatures above 104°F for an extended period of time, as this can cause the Nitro Duet parts to overheat and burn the user
  • Please make sure the Nitro Duet is fully opened, seat is down and the folding bar under seat is locked in the down position
  • Be sure that both knobs are fully tightened and are at equal heights. Test the Nitro Duet for stability before applying weight to hand grips.
  • Regularly check the screws and fasteners on the Nitro Duet and tighten if necessary
  • This item should never be used in a moving vehicle
  • When exiting the transport chair
    • Engage wheel locks by pressing down on brake handles
    • Remove feet from footrests first and place firmly on the ground
    • Then use armrests for support before attempting to stand up Assistance is always suggested
  • Use bag only for the transport of objects and do not overload. Maximum load: 11 lbs.

Drive Nitro Duet Specifications

Particulars Specifications
Seat Width 18"
Seat Depth 14"
Seat to Floor Height 20.5"
Number of Wheels 4
Inside Hand Grip Width 18"
Handle Height (Min) 33"
Handle Height (Max) 37"
Rear Wheel 8"
Front Wheels 10"


Nitro Duet Transport Chair Warranty

Lifetime Limited Warranty

Drive RTL10266DT Transport Chair Reviews


{{x.ShortDescription}} ...


Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com