Drive Med Aire Bariatric Alternating Pressure and Low Air Loss Mattress Replacement System

Features

• Drive Med Aire Bariatric Alternating Pressure and Low Air Loss Mattress Replacement System comes with EZ Lock/Quick Release Tubing Connector
• Cell-on-cell design of 10" deep air cells prevents bottoming out and also provides up to 24 hours of power outage protection
• Whisper quiet pump produces 12-LPM (Litres per Minute) in air flow
• Each one of the 20, 10" deep air bladders are easily removed and replaced
• Stretch cover is low shear, fluid-resistant, vapor permeable, quilted and zippered
• 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
• Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
• CPR (Cardiopulmonary Resuscitation) valve allows for rapid deflation

More Information

• Handling and storage:
  - Lay the mattress out flat and upside down
  - Roll from the foot end towards the head end, the foot-end strap can then be stretched around the rolled mattress to prevent unrolling
  - Do not fold, crease or stack the mattress
• Maintenance:
  - Check the power cord and plug to see if there are abrasions or excessive wear
  - Check the mattress cover for signs of wear or damage
  - Ensure the mattress cover and tubes are connected together correctly
  - Plug in the pump and check the airflow from the hose connection port
  - The airflow should alternate between ports every half-cycle time
  - Check the air hoses to see if there are kinks or breaks
  - Make sure the mattress tube is well connected
  - Check the pump and make sure both power and power indicator are off when the switch is turned off
• Low pressure examination:
  - Examine if there is air leakage between the pump and the mattress connections or from the air mattress tubes
  - Check connectors between the air mattress and pump
  - If there is any disconnection, please reconnect it
  - Check the CPR valves and ensure their outlets are sealed
  - Check the air-connecting tubes
  - Turn the pressure-adjust knob to Firm
  - Keep the tubes fully inflated and inspect for air leakage
  - Check if there is any air leakage from cells
  - Ensure no leakage occurs