Save 20% On Your First Autoship Order

Day
:
:
Online since 2002 |   866-316-0162

View product option

Drive Bariatric Sentra Extra Heavy-Duty Wheelchair

Brand: DRIVE MEDICAL SKU: STD20DDA-ELR
Authorized Retailer
Product Option

20" Seat : Swing Away Elevating Legs

SKU STD20DDA-ELR
$709.67 Each

22" Seat : Swing Away Elevating Legs

SKU STD22DDA-ELR
$698.91 Each

24" Seat : Swing Away Elevating Legs

SKU STD24DDA-ELR
$698.91 Each

20" Seat : Swing Away Footrests

SKU STD20DDA-SF
$677.41 Each

22" Seat : Swing Away Footrests

SKU STD22DDA-SF
$655.90 Each

24" Seat : Swing Away Footrests

SKU STD24DDA-SF
$720.42 Each
Request quote

Drive Bariatric Sentra Extra Heavy-Duty Wheelchair boasts a 500-pound weight capacity, made possible through the use of reinforced steel gussets, heavy gauge reinforced Naugahyde upholstery, reinforced side frame, caster journals, and dual cross bars. The stylish triple coated chrome frame, made of carbon steel, adds a touch of elegance to this bariatric wheelchair. It comes with detachable desk arms.

$879.99

Total: $709.67

Earn $21.29 in HPFY rewards
Shipping charges applicable
For Assistance 877-278-6039

Features

  • Drive Bariatric Sentra Extra Heavy-Duty Wheelchair comes with push to lock wheel locks
  • Aluminum footplates are attractive, crack-proof and lightweight
  • Carbon steel frame with TRIPLE coated chrome for an attractive, chip-proof, maintainable finish
  • Comes standard with carry pocket on back rest
  • Composite Mag-style wheels with chrome hand rim are lightweight and maintenance free
  • Dual position front fork
  • Dual position front frame
  • Durable, heavy gauge, reinforced Naugahyde upholstery
  • Padded armrests provide added patient comfort
  • Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
  • Reinforced side frame, caster journals, and dual cross bars
  • Reinforced steel gussets at all weight bearing points provide additional strength
  • Click here for user manual

More Information

  • Use and Safety:
    - Wheel Locks:
    Engage both wheel locks before getting in or out of the chair, leaning forward in a chair, or while in an elevator or wheelchair lift. Proper adjustment of wheel lock is at least 1/8" when locked. Locks are engaged by pushing handle completely forward. Adjustments to locks are made by loosening or tightening the nut on the carriage bolt. Embed lock shoe at least 1/8" by sliding clamp toward rear wheel while the handle is engaged in locked position. Tighten nut and bolt to secure in position. Test for correct locking action before actual use.
    - Tires: Solid rubber tires need minimal maintenance, but should be cleaned occasionally with a damp cloth. Replace if tires become severely worn or cracking appears.
    - Front Casters: Casters should be checked periodically and lubricated occasionally. Lubricate by removing the fork and greasing caster stem bearings. Lubricate wheel bearings by removing the wheel from the fork. Reassemble fork and wheel by tightening nuts until no play remains, but wheels roll freely. If the nut is too loose, the caster will shimmy, if too tight, the chair will be hard to steer.
    - Removal of Swing-away Footrests/Leg rests: Release lock by pushing on the front rigging lever. Swing-away foot rest /leg rest out and sideways. Lift to remove.
    - Adjusting Length of Footrest/Leg rest: When adjusting the length of foot rests or leg rests, the user should be sitting in a wheelchair with feet on the foot plates. Loosen bolt on the clamp around support assembly. Raise or lower foot plate to the desired position that will provide maximum support for thighs. Front rigging should not be so low that it causes uncomfortable pressure to thighs at front of seat upholstery. The footrest should not be lower than 2-1/2" from the ground to ensure clearance.
    - Adjusting/Elevating Leg rest Lift foot plate on leg rest assembly to the desired position. Release leg rest assembly and it will automatically lock into place. To lower, push out on leg rest lever and lower foot plate to the desired position.
    - Wheels: Large rear wheels should be inspected at least once a month to ensure proper tightness. If wheel wobbles or is loose, release lock nut and tighten axle bolt slightly. Test for proper tightness by learning chair to one side and spin the adjusted wheel.
    - General Care: Wipe chrome parts with a clean, soft cloth at least once a week. All metal parts can be cleaned with auto wax or similar products. If exposed to moisture, dry immediately. Do not use an abrasive cleanser that will scratch the finish.
    - To Open Chair: Open wheelchair by tilting to one side and pushing down on seat rail until fully opened.
    - To Close/Fold Chair: First, fold foot plates to a vertical position. Grab a seat with both hands at front and back edge and lift. Or, tilt chair to one side and lift up on seat rail.
    - Removable Arms: Remove arms by depressing spring button and lifting arms out of the front and rear sockets.
  • Warning:
    Do not attempt to adjust or operate wheelchair without reading carefully all instructions in this manual.
    - This wheelchair has not been approved as a seat that can be used within vehicles of any kind. Always transfer wheelchair user to a vehicle manufacturers approved seat and use safety restraints available
    - Do not operate this wheelchair on roadways, streets or any surfaces with
      vehicular traffic
    - Do not attempt to operate on inclines 10% or greater without proper 
      assistance
    - Be sure to completely engage wheel locks when getting in and out of
      wheelchair or when in an elevator or wheelchair lift
    - Wheelchair should be on a smooth, stable and level area with wheel locks
      engaged in transferring user in or out of the wheelchair
    - Do not adjust foot rests any lower than 2.5 from floor
    - When getting in or out of wheelchair, do not stand on or apply weight to foot
      rests
    - Before reaching or leaning forward, rotate casters to front of the wheelchair
      engage wheel locks to help prevent the wheelchair from tipping over
    - Do not lean over or apply weight to the top of wheelchair back. This can
      cause wheelchair to tip over. When trying to extend arms over back, only
      reach as far as your arm can extend without having to alter your seating
      position
    - Do not stand on wheelchair
    - Do not use wheel locks to slow your descent down an incline
    - Abruptly changing directions while going down an incline could cause
     instability or possible tipping over
  • Caution:
    Stability
    :
    - Wheelchair is designed to be safe and stable as long as center of gravity is maintained while going about normal activities
    - Care must be taken while performing activities that shift your center of gravity in the chair
    - Never reach so far that require you to shift in the seat or bend over out of the chair
    - When you have to reach for objects that require you to lean, be certain front casters are pointing in a forward position that extends the wheel base and will stabilize the chair
  • Ramps:
    - Be sure of your own capabilities, limitations and strength before attempting to go up a ramp
    - Correct techniques on ramp negotiation should be shown to you by a qualified professional
    - Assistance is recommended when going up or down inclines greater than 10 degree
    - If you must stop on an incline, avoid sudden, abrupt movement when you resume movement
    - Because of backward angle of the chair, sudden abrupt movement could cause instability
    - Attempting to use the wheel lock brakes could result in accidental locking, tipping to one side, or cause a sudden stop
    - Avoid changing direction when going down an incline, as this could result in instability of tipping over

Specification

Particulars

Specifications

Width (open)

29"

Width (closed)

13"

Height

37"

Seat to Floor Height

17.5" to 19.5"

Back Height

18"

Seat Width

20",22",24"

Seat Depth

18"

Length with Riggings

42"

Weight

54lb

Weight Limit

500lb

Warranty

Limited Lifetime Warranty

Product Videos

Related Articles

{{x.Heading}}

{{x.ShortDescription}} ...

Share

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
Message
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close