DonJoy IceMan CLASSIC3 Cold Therapy Unit

Why Choose DonJoy IceMan CLASSIC3?

When to use IceMan CLASSIC3 Cold Therapy Unit?

IceMan CLASSIC3 temporarily reduces swelling and pain after surgery or injury. This is a non-sterile prescription device for single-patient use to provide the localized external application of cold therapy. This device may not be used for any other purpose.

How to use IceMan CLASSIC3 Cold Therapy Unit?

1. Add ice to the level indicated inside the unit, then add 2 quarts or 2 liters of water.
2. Apply the site-specific pad to the area to be treated. The pad should be applied over a thin layer of gauze or stockinette. Do not apply a cooling pad directly to the skin.
3. Connect the cooling pad to the hose extending from the cooler, making sure the connectors snap into place tightly together (listen for an audible click).
4. Plug the power supply into the wall.
5. Connect the power supply cord provided with the unit to the connector on the cooler's front. This will immediately start the motorized pump. WARNING: use only the power supply that came with this unit. DonJoy P/N 13-4882-0-00000. Failure to do this could damage the pump, the power supply, or both.
6. Adjust temperature control on the hand console starting at the blue dot (allow 10 minutes for the temperature to stabilize) and adjust to the temperature prescribed by a physician. (Temperature indicated by the thermometer.)
7. When the ice has melted, refill it with ice and water. Make sure the device is unplugged during the refilling procedure.

ICEMAN With Dual Pump Recirculation Technology

Note: This item is non-returnable due to hygiene purposes.

How to Clean DonJoy IceMan Machine CLASSIC3?

• Unplug the power supply from the electrical outlet.
• Do not unplug the power supply with wet hands to avoid the danger of electrical shock.
• Disconnect the pad from the hose.
• Drain cooler and wipe dry.
• Drain the pad by holding it so that the hose is hanging downward.
• Press the buttons at the end of the hose and allow all water to drain out of the pad.
• If cleaning is necessary, wipe down the device and hand wash pads and wrap with mild soap and warm water. Air dry.

Warning:

• This device can be cold enough to cause serious injury.
• Read and understand all warnings and instructions for use before using this device.
• Additional warnings appear in the instructions for use.

Frequently Bought Together

• Donjoy Universal Cold Pads
• Donjoy Wrap-On Non-Sterile Pads
• Donjoy Dura Soft Shoulder Wrap

User Guides

• IceMan CLASSIC3 User Manual
• DonJoy Iceman Instructions for Use
• DonJoy Iceman Cleaning and Storage

IceMan CLASSIC3 Cold Therapy Unit FAQs

What can I use other than standard ice cubes to cool the water in my IceMan Classic3 or Clear3 Unit?

Suitable approaches for cooling the water involve placing it in Red Solo Cups or Tupperware and freezing the contents to create sizable ice blocks. Once formed, these blocks can be easily extracted and transferred into the unit.

Can I freeze water bottles and place them into the IceMan Classic3 or Clear3 unit?

It is not advisable for a couple of reasons. Firstly, the plastic from the bottle forms a barrier between the ice and the water in the unit, hindering the water from attaining the optimal therapeutic temperature. Secondly, the breakdown of paper and/or glue from the water bottle label can introduce problems if it enters the hose or pad.

The pad doesn’t seem to feel very cold. How do I know the water is cold enough?

The therapeutic range for cold therapy encompasses temperatures below 55°F. Our semi-closed loop system employs a mixing chamber and maintains a flow rate that directs water into the pad within the ideal treatment range of 38°F to 42°F.

Ensure that the unit is adequately filled with ice to effectively cool the water. Double-check the ice level to guarantee optimal cooling performance.