ConvaTec Aquacel Ag Non Adhesive Foam Dressing

Why choose Aquacel Ag Foam Dressing?

1. A waterproof top layer that permits evaporation of excess moisture while protecting against viral/bacterial penetration, allowing the patient to shower and bathe
2. A soft, absorbent foam pad to enhance patient comfort and absorb excess fluid 
3. A Hydrofiber layer with ionic silver that gels on contact with wound fluid and helps provide an optimal environment for wound healing 
4. A gentle silicone adhesive that provides secure, skin-friendly adhesion, easy removal and demonstrated low potential for dermal irritation or allergic contact sensitization

Benefits of Aquacel Ag Foam Non Adhesive

• ConvaTec Aquacel Ag Non Adhesive Foam Dressing with silver for the protection and management of exuding wounds
• A waterproof, bacterial and viral barrier dressing
• Vertical wicking prevents lateral spread of fluid, reducing risk of maceration
• Micro-contours to the wound bed, minimizing dead space where bacteria can grow

How Hydrofiber Technology Works?

• Hydrofiber Technology is a soft, absorbent material that transforms into a gel on contact with wound fluid
• The gelling action creates an optimal environment for wound healing

Benefits of Hydrofiber Technology in Aquacel Ag Foam Dressings

When to apply Aquacel Foam Non-Adhesive ?

• Leg ulcers, pressure ulcers (stage II-IV) and diabetic ulcers
• Surgical wounds (post-operative, donor sites, dermatological)
• Partial-thickness (second-degree) burns
• Traumatic or surgical wounds left to heal by secondary intention such as dehisced surgical incisions
• Surgical wounds that heal by primary intent, such as dermatological and surgical incisions (e.g., orthopedic and vascular)
• Local management of wounds that are prone to bleeding, such as wounds that have been mechanically or surgically debrided and donor sites
• Painful wounds
• Abrasions
• Lacerations
• Minor cuts
• Minor scalds and burns

What to buy with Aquacel Ag Wound Dressings

• ConvaTec SAF-Clens AF Dermal Wound Cleanser
• ConvaTec AllKare Adhesive Remover Wipe
• Medline Curad Sterile Nonstick Pads

How to apply ConvaTec Aquacel Ag Foam Dressing?

1. Always ensure the skin surrounding the wound is clean and dry. Choose a dressing size and shape to ensure that the central absorbent pad (area within the adhesive window), is 1 cm larger than the wound area.
2. The dressing can be cut to shape for convenience. If the adhesive dressing is cut, additional tape may be required to secure it in place. Additional tape, or other means of fixation, will be required to secure the Aquacel Foam non-adhesive dressing in place.
3. Remove the dressing from the sterile pack, minimising finger contact with the wound contact surface and the adhesive surface where applicable.
4. Remove the release liner if using the adhesive dressing.
5. Hold the dressing over the wound and line up the center of the dressing with the center of the wound. Place the pad directly over the wound. For the adhesive dressing, smooth down the adhesive border.
6. Additional tape or other means of fixation will be required to secure the non-adhesive dressing. Discard any unused portion of the product after dressing the wound.

How to remove an Aquacel Ag Non-Adhesive Dressing?

1. First, always thoroughly wash your hands with soap and water.
2. Apply sterile saline or sterile water to the underside of the dressing.
3. A sterile swab moistened with sterile saline can help with this procedure if needed.
4. When the dressing is completely loose, gently lift it off of the wound bed.

Tips to use Aquacel Ag Non-Adhesive Hydrofiber Dressing

• The pad on the adhesive dressing should slight exceed the wound area.
• Lightly exuding wounds may require gently moisten the wound with sterile water or saline.
• Apply an Aquacel dressing that is slightly larger than the wound area.
• Non-adhesive bandages should be covered with a sterile secondary dressing to keep the bandage in place.
• Adhesive bandages should not have any of the border area in contact with the wound.
• Heavy exuding wounds should use an absorbent dressing pad and may require daily changes.
• As the wound heals and less exudate occurs, a thinner pad or film dressing that retains moisture may be necessary to prevent the wound from drying out too quickly.
• Aquacel dressing construction has significant strength even when significantly wet to remove from a wound in one-piece.
• If necessary, irrigation with water or sterile normal saline may help with dressing removal.