Clarke Dolomite Legacy Walker
Clarke Dolomite Legacy Walker

Clarke Dolomite Legacy Walker

Brand/Manufacturer: CLARKE HEALTH CARE
Save
Authorized Retailer Badge

Clarke Dolomite Legacy Walker is reliable and durable and accommodate a wide variety of users. It has forward facing handles which promote better posture. It comes in three seat and frame heights and the large eight inch wheels are for indoor or outdoor use. The DABS patented braking system is easy to use for direct braking or parking.

Item #DescPkgPrice 
D12050R Standard, Candy Red Each $415.55 $305.00
D12050B Standard, Metallic Blue Each $415.55 $305.00
D12052R Low, Candy Red Each $415.55 $305.00
D12052B Low, Metallic Blue Each $415.55 $305.00
D12054R Super Low, Candy Red Each $415.55 $305.00
D12054B Super Low, Metallic Blue Each $415.55 $305.00

Features

  • Clarke Dolomite Legacy Walker has folding frames for ease in storage and transporting
  • Flip-up seat for greater reach or gait training
  • Seat handle releases to fold walker
  • Magnetic seat latch secures against accidental closure
  • Curb climber on rear wheel assists in lifting the front of walker
  • Foam grips for comfortable and secure grip
  • Flexible and adjustable back strap
  • Basket with carry handle
  • Welded steel frame
  • Instruction Sheet
  • Operating Instructions
  • User Manual

More Information

  • Frame:
    The strongest frame on the market, Dolomite welds the steel frame for greater durability, no screws to loosen at joints. Legacy is available in two colors: Metallic Blue or Candy Apple Red. There are three frame sizes to accommodate individuals of all sizes. Dolomite frames are easily folded for storage or transportation. The handles are height-adjustable in 4 increments.
  • Braking:
    Legacy comes with the patented Dolomite Automatic Braking System with adjustable tension for varied grip strength. Brake handles have a wide flange and large loops for comfortable hand positioning. When parked and using the seat, push down the handle to set the parking brakes. The brake mechanism is located within fork for protection from damage. Accessory slow down brake provides adjustable tension for hilly terrain or to even out the direction of travel for stroke patients.
  • Installing Curb Climber:
    - Remove hubcaps, use pliers to pull off.
    - Remove axle bolt and nut.
    - Insert curb climber, on inside of walker right wheel, position between wheel. and fork. The top hole is for 8" casters (Futura) and bottom hole for 7" casters (Opal 2000).
    - Reinsert bolt and tighten nut 5.Replace hubcaps, using a rubber mallet.
  • Safety:
    - Do not use as a wheelchair or transport chair
    - Do not under any circumstances stand on the walker
    - Use seat for stationary seating only. Never sit and push with your feet
    - Do not go up or down stairs or use on escalator
    - Both brakes must be in the parking position when the walker is used as a seat
    - The walker must be fully unfolded when used as walking support
    - N.B. The walker may only be used as a walking support
    - Be extra careful when using the walker on a sloping surface
    - Be extra careful when carrying heavy loads in the basket. Loads may only be carried in the basket or on the tray. Maximum load on tray 11lb (5 kg)

Specification

ParticularsSuper LowLowStandard
Distance Between Rear Wheels19"19"19"
Minimum Handle Height28"31"33"
Maximum Handle Height31"34"37"
Minimum and Maximum Tall Handle Heights31" to 35"33" to 37"35" to 39"
Seat Height19"22"24"
Overall Width23"23"23"
Overall Length23"26"26"
Width Between Handles17"17"17"
Folded Dimensions36"L x 23"W x 12"H36"L x 23"W x 12"H36"L x 23"W x 12"H
Walker Weight15lb15lb15lb
Weight Capacity 350lb350lb350lb

Warranty

Manufacturer provides a 2 year warranty against manufacturers defects. Excludes wheels, brake cables and hand grips; damage due to wear and tear or abuse.

Customer Reviews

Questions & Answers


 
 
question image
HOW CAN I ADJUST THE BRAKES?
Rafael Rivera - 12/6/2016 10:12:57 PM
facebooktwittergplus
answer image
For desirable braking strength, adjust the brake wire of Clarke Dolomite Legacy Walker. Suitable tools 1x8 mm and 1x10 mm spanner.
Customer Care - 12/9/2016 1:46:05 AM
question image
can you order handle screw and what is the price
dianne downing - 6/9/2016 1:09:39 PM
facebooktwittergplus
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close