Answer: OPTIFLEX®
-K1 devices with
patient chip card only.The patient must be familiar
with the functions of the
OPTIFLEX®
-K1 programming
unit and the unit must be within
easy reach of the patient, allowing
him or her to stop therapy, if
needed.
After data storage, write the
patient‘s name on the patient
chip card. The card should only
be used for this patient.
If the patient chip card is used
for another patient, be sure to
delete the previous patient‘s
data from the card first
(see: section 5.2 Programming:
“New Patient”).
Use original chip cards only.
Please refer instruction manual given on below link.
http://www.rehabtechnologiesonline.net/documents/p19ddmet3513nmsmgjs1mg72g13.pdf
HPFY Customer Care
Store answer
Helpful?
